800 RZR Wheel Spacers

[RCBuilder]

Specific problem is with the lug nuts coming off on trail rides. Purchased the RZR used and it came with spacers, mag wheels and what appears to be standard lug nuts that came with the spacers. The tires and wheels were upgraded from the standard 12" up to a 14" - guess the previous owner was looking for a bit more ground clearance.

Does anyone have a solution to keeping the lug nuts tight, long enough to do a trail ride? or Is there a special aftermarket stud and lug nut combination that is better suited for my application?

[brostar]

You are supposed to use the nuts that came with the spacers to secure them to the hub & there is a possibility that your stock nuts for the wheels are locking the spacers to the hub and vice versa. The torque setting should be 56 to 60ft lbs to the hub and the wheels to spacers. It sounds like you have the stock wheel nuts on the spacers. Try swapping them to see if that works.

[RCBuilder]

Good Catch. You are correct - The original lug nuts were used to attach the spacer and the nuts that came with the spacer were used to attach the wheel. I will change them around and see what happens. Thank You for your response.