Quantcast
Jump to content


Trooper T4 No Spark

Countryboy59

By Countryboy59
in Joyner UTV SxS Forum

 Share

Recommended Posts

Countryboy59 Rookie

Countryboy59

Posted
Posted

Does the Trooper T4 need to have the fuel pump running and build pressure before the Ign. has spark?

I bought a used T4 that ran when it was setup 4 years ago. Drained gas tank.

Checked for spark at plug wire, None! Did not hear fuel pump run when cranking.

Does it have spark even without fuel pump in operation. I checked all the fuses they are OK.

I do have the manual.

post-3653-0-18906700-1463533842_thumb.jpg

  • 1 year later...
Dan B Community Regular

Dan B

Posted
Posted

I have an R2-1100cc witch is almost like a trooper with a different body style. After I turn the ignition on, I have to wait about 3-5 seconds for the gauges to cycle before I can start the engine.  It probably has something to do with the ECU "booting" up.  I don't think the ECU gets power until the ignition switch is in the "ON" position.  Like the computer you are using now, you can't turn it on and use it until it boots up.  At least that'w what makes sense to me.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • downseast
      2020 T-Boss 410 running problems
      By downseast
      Hi everyone
      Recently purchased a 2020 T-Boss 410 in what appears to be good condition
      First time with this machine – I also have a diesel Kawasaki Mule which so far seems a better machine
      It didn’t start and idle well particularly from cold when I got it and sudden take off ( now solved with new clutch parts ) was all or nothing !
      I have replaced the idle valve, throttle position sensor, had the injector professionally checked ( ok) and also the pressure sensor this is a fuel injection engine, also plug and lead etc!
      It still doesn’t run well and when starting I have to hold revs for a while as it wont idle but stall, thereafter its better and I have rebooted the ecu which has improved it
      When I go to start it clicks as if there is a hydraulic lock and wont return after two or three attempts it then does turn over and start bit I need to give it a bit of throttle to start – is this normal ?
      Is there adjustment for the air idle valve ?
      The engine seems rough and with vibration compared to other engines I have been used to but some say this is normal?
      I haven’t changed the Lambda sensor yet, anyone know how much difference this might make ( I have a new Bosch universal to fit )
      Any advice very much appreciated, thanks
    • D MAYNARD
      Axis 500 4x4 turns over but no spark
      By D MAYNARD
      I have an Axis 500 4x4 UTV that I was given.  It looks like an almost new machine with 39 hrs on it however it was apparently under water from the hurricane . I have no spark at the plug. I have replaced the plug, the plug wire, & the stator so far. Can anyone advise me of what i need to check and or replace to get this thing running? Any advise would be greatly appreciated. 
                                    Thank You,
                                  D Maynard 
       
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
    • CRV
      Need some help. Looking for some parts too
      By CRV
      Howdy new member here . My hobby's Rabbit dogs , gamefowl . I'm retired from my real job but I stay busy with the hounds and gamefowl . So to help around the farm I ran across an old 2007 CC Big Country 4x2 to haul feed , water , sprayer and my sorry a$$ .It is in pretty good shape , 781 hrs. good plastic , tires, ect. . But as anything outside and 18 years old it needs seats ! The thing I have found wrong mechically the Diff. Lock Acturtor is broken where it mounts to the bracket ( partly why Im here ) . Hoping someone here can help  ! Just my wish list but Id like to find a roll cage and a composit/plastic top for it Im thinking I'll need a donor to salvage these things from ( again partly why Im here ) .Is there another brand that uses this same actuator? If anyone reads this and has or knows of any of threse parts PLEASE HOLLER !! 
      Again Howdy brothers & sisters

    • weasel
      Coleman 400 UTV fuel issue
      By weasel
      starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...