Quantcast
Jump to content


Chery 1500cc in the Renli Buggy

2scoops

By 2scoops
in Renli UTV SxS Forum

 Share

Recommended Posts

2scoops Proficient

2scoops

Posted
Posted

We need to get info on these and see what a engine and tranny would cost. I will be the guinea pig if it's not to expensive, but I do need to know if they have a low first gear for crawling or I am not interested.

If anyone has any info please share. I will be looking into it as well. 108 NA no sure sounds nice.

  • 2 weeks later...
  • 3 weeks later...
silverbullet Experienced

silverbullet

Posted
Posted

silverbullet

We have made a deal with a Joyner vendor who dose all drive trains parts.We will supply a trooper rear differentials.We will up grade them with Lenny's up grades.We all know how his up grade work. Price will be 685.00 + shipping.Will have supercharger very soon.We spent a lot of time making this innovator supercharger.We have tested it for months.Found small things and fixed them an are satisfied with this will be a bolt on system.Working on fabricating jigs to build the units.But differential are hear now.

  • 2 weeks later...
  • 4 weeks later...
silverbullet Experienced

silverbullet

Posted
Posted

silverbullet

The funny thing about the 1500 Renli is they use a trooper rear differential.Just can't get away from Joyner.Big engine for that differential.I have started to sell parts for Renli.

Also new motor the SQR 371 1.0 L.3 cylinder more H/P and torque.Than the 1100cc motor.

  • 9 months later...
silverbullet Experienced

silverbullet

Posted
Posted
On 7/10/2016 at 7:25 AM, Yoshio said:

Will the supercharger fit sandviper model also? What's the suggested price for it? More details!

silverbullert

It will fit all chery based buggys.Water Meth system is done we are working on the supercharger.We have one tech working on it till it is finished.This is all he is working on till done vary soon it will be ready.I have so many customs who want it.I can't wait till its on the Dyno to see the Torque its put out.He is finishing the small details.Mount Bottle,pump for Meth.Egt gauge and air fuel ratio gauge.10 days at most still have to get in touch with Dyno shop.On Monday

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • boydog40
      2008 landmaster lm650 engine swap wiring problems
      By boydog40
      my subaru gave it up, bought a new Predator 670cc
      problems is, wiring the buggy to the new motor, OEM key switch has 5 wires (red, green, yellow, black and brown)
      new motor has many more wires than the Subaru and i have no idea what goes where!!!
      finding any info on the web is almost impossible to do also
      any help will be greatly appreciated!
      thanks guys
    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • Homeowner A
      UT400 First Oil Change Overfull Milk Chocolate What to Check
      By Homeowner A
      Picked up an essentially new 2022 UT400 with 9 miles on it.  Decided to change the oil because it's probably never been done.  Pulled the dipstick and noticed it was overfull then went and pulled the drain plug and took off the filter and it was like brown water running out.  What should I start checking?
    • Ductking1
      2024 Hisun Sector 550 gear sector binding
      By Ductking1
      I recently purchased a 2024 Hisun 550 Sector from Kreps Service Station and am having issues with the gear selector, I am doing as instructed in the owners manual but the shifter acts like it is binding or the button lock isn't releasing, the shifter will not move, I have to wiggle it back and forth while pushing hard on the brake and if it's in park or reverse it's nearly impossible to get it to move, I contacted Justin Krep and he says this is normal with these machines, I find that hard to believe, I've owned many utvs and side x sides and have never had this kind of issue with any of them, any help with this problem would be greatly appreciated.
    • Justine
      Hisun Vector E1 - Gear oils
      By Justine
      I've had a Hisun Vector E1 for just a bit longer than is required for me to do some maintenance. While it's well-overdue, it only drives 1.5km a few times each week on a fairly decent gravel road (to the letterbox), and it has worked really well right from the get-go.
      Looking at the manual it states that I need to use SAE80 API GL-4 Hypoid Gear Oil for the Main gear Case, and SAE80 API GL-5 Hypoid Gear Oil for the Front gear Case - unfortunately i can't find either of those online here in Australia. Plenty of options that look close, but, as someone who has never driven any vehicle before, I want to use the right thing and it's a tad confusing.
      My question: Since there are no oils that are bang on SAE80 (they all seem to cover a range) would Liqui Moly Hypoid GL4 Gear Oil 80W-90  & Motorex Hypoid GL-5 Gear Oil 80W90 - be ok to use? (Or any other suggestions of what I might be able to purchase online in Australia) And would I have to drain out any existing oil from both gear cases?
      This is a whole new world for me and  being able to find exactly what is specified in the manual hasn't made this easy!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...