Quantcast
Jump to content


Recommended Posts

Posted
On 3/20/2017 at 6:42 PM, wezl99 said:

does anyone have information on evol evolution 1100sxs

I found this on e-bay but never could find any service or parts vendor. I almost bought one but after investigating I believe it's a SCAM. The seller is buying Feedback to look good and he offered me a reduced price BEFORE the auction ended(I was not high bidder). I asked him to send an Invoice and the address on the invoice is not his (It is in Asburn,VA and I searched it on Googled maps and contacted a business in the same building and they never heard of his store. I have reported him to e-bay but he is still selling. I would stay away from this seller if that is where you found this UTV as no one in the US is selling this model and no other information can be found. 

eBay item number:
132139608495 Ends today He has listed this item 4 different times
Posted (edited)
43 minutes ago, Kinarfi said:

high light "evol evolution 1100sxs" and have google do a search, it comes up with a Utube video by William Motor Sports ,

I did see a Chery engine, but I don't think it's Joyner, maybe similar to a Kimco or some other chinese rig

That is the Vendor I dealt with. He also has a facebook page.  He has only been a seller on e-bay since March 2. 2017 and he lists all items as Private so you can't contact other buyers or bidders.He also used the same VIN on 2 different listings on this Model and also goes by William Motor Works

Edited by HAWG_MAN
spelling error

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
×
×
  • Create New...