Quantcast
Jump to content


Recommended Posts

Posted

I need a lil help guys. I have a 2009 trooper and I bought a new 4x4 actuator for it. It came in and is a 4 wire connector. Mine is a 3 wire connector. Does anyone know how to make this work or have a wiring diagram that I could wire it myself? Thanks in advance.

Tim

  • Like 1
Posted

silverbullet.

That's the way it is.# 4 wire on the plug and 3 wires on the other plug. If you want I can check the colors on Monday.But it should work the way it is. Maybe wiring or switch is the problem.

Thanks Rich

Posted

pulled up an old schematic and if memory serves me well, red is power on all the time, black ground, yellow and white are in and out signal wires, test it out your self to see which is which, my guess is on the 3 wire system, yellow and white carried the motor current and just drove the motor to the limit switch, the 4 wire does the same, but there is only signal current on the yellow and white instead of motor current which is carried on the red and the relay in the actuator, so the switch lasts longer.  So just put power on the red and the switch to yellow & white.   If you still have the old dead one and feel like sending it to me, I'll rebuild it with FETs  and send it back to you for a spare for far less that the new, probably just postage and parts, I do it something to do. PM me if you want.

  • Like 1
  • 4 weeks later...
Posted

AWESOME! Thanks. I haven't been on because it wouldn't let me sign in. Finally got that taken care of. 

I have the switch, harness and actuator out of the joyner. I'm gonna do it remotely and see if it works. (much easierto get to)

The old box does not have any of the motors or gears in it. I'm not sure you could do much with it but thanks anyways.

Tim

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
×
×
  • Create New...