Quantcast
Jump to content


new to me mule 1000


Recommended Posts

So i just picked up a 1991 mule 1000 that i know nothing about is there anything i should be looking out for? like is it hard to find parts for this model and is there anything thqt went wrong in that year of model? i just want to know some genral idea of what i have bought

 

Link to comment
Share on other sites

Depending on how hard it was rode, and pretty much a 100% guarntee the engine needs rebuilt, i am rebuilding my engine on my 2001 550, here is where i got all myparts:http://www.kawasakipartshouse.com/oemparts/l/kaw/50a64443f870022674af6aae/2007-prior-mule-1000-kaf450-b1-parts

Taken from Wikipedia.

In 1988, the first Kawasaki MULE was introduced in the form of the MULE 1000; it featured a water-cooled 454 cc (27.70 cu in) twin-cylinder engine, which was fitted to an open-cab utility vehicle chassis.[1] The MULE 1000 also featured a continuously variable transmission (CVT),independent suspension at the front and rear and a locking rear differential.[1]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Woody77
      UTV MASSIMOREPLACED STATOR WANT start replaced rectifier still want start stator ohms out 5 ohms each leg what could be wrong at this point 
    • By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks
    • By Quentin Walker
      Hi all. I am in dire need of some help. Through our university, we are competing in the Baja SAE competition. It is a collegiate engineering design competition to design and manufacture an off road dune buddy.
      To cut to the chase, we were donated a 2011 Hisun HS 700 UTV, and we are using suspension and drivetrain parts off of it in our design. I am in the process of ordering new parts, but I am coming to a standstill.
      Does anyone have any experience ordering parts for these machine?
      From what I have found online, these machine were sold by Tractor Supply, along with a few different brands that share the same parts (Supermach, Coleman, Massimo, etc.)
      Any help is appreciated. Thanks in advance.
    • By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh
×
×
  • Create New...