Quantcast
Jump to content


new to me mule 1000


Recommended Posts

So i just picked up a 1991 mule 1000 that i know nothing about is there anything i should be looking out for? like is it hard to find parts for this model and is there anything thqt went wrong in that year of model? i just want to know some genral idea of what i have bought

 

Link to comment
Share on other sites

Depending on how hard it was rode, and pretty much a 100% guarntee the engine needs rebuilt, i am rebuilding my engine on my 2001 550, here is where i got all myparts:http://www.kawasakipartshouse.com/oemparts/l/kaw/50a64443f870022674af6aae/2007-prior-mule-1000-kaf450-b1-parts

Taken from Wikipedia.

In 1988, the first Kawasaki MULE was introduced in the form of the MULE 1000; it featured a water-cooled 454 cc (27.70 cu in) twin-cylinder engine, which was fitted to an open-cab utility vehicle chassis.[1] The MULE 1000 also featured a continuously variable transmission (CVT),independent suspension at the front and rear and a locking rear differential.[1]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
    • By sxr951
      parts for massimo, hisun,etc in florida? where can i get parts for the massimo 700.. like bolts and console i  didnt see any bolts on amazon to go with cylinders and any thing when rebuilding a 700 engine 
    • By Robert Merritt
      I have an older Bristers Trailwagon model TW11 with a Honda engine. I am trying to find a replacement muffler for it. It is an unusual muffler tapped in the center instead of the end with the heat shield welded on to it. Does anyone know where I can find a new one?
    • By BernieG
      I could really use some help identifying some disconnected components on a Yard Sport YS400. The first part is this pipe, which comes out of the exhaust port area or the cylinder. It looks like it had a piece of rubber hose on it, but the hose is gone, and I have no idea what it was previously connected to.

      The second item is this vacuum valve looking thing.  Again only one line is still attached.  What is it's function and what other lines should be connected to it?

      The last thing is this hose, which exits the side top of the fuel tank (not the fuel line hose) but is not connected to anything

       
      Any help the community could provide would be greatly appreciated.  This UTV belongs to a friend, and I am trying to help him get it running correctly for his kids.
    • By Stan Morton
      My 2018 XG-850-SL starter died yesterday. The old part number from Kubota is E7153-11732 which has been superceed by part # EG881-63010. I am looking for an aftermarket starter because the Kubota retail price for the starter starts at $550 and upwards toward $850.  If anyone has gone down this road before and has found an aftermarket starter ~ please share with me. We own a ranch and this thing is used every single day and is sorely missed when it is down for maintenance.  Kind Regards, ~ Stan
×
×
  • Create New...