Quantcast
Jump to content


EH65 spitting fuel from breather hose into air filter.


Go to solution Solved by Jim Kessell,

Recommended Posts

  • 4 weeks later...
Posted

Just like an old car or truck PCV valve.

PCV = Positive Crankcase Ventilation

Basically any gasses that blow-by the piston rings into the crank case need a place to go. So the PCV valve (one-way check valve) let the gasses out but doesn't allow any in. Usually a hose runs from PCV valve to breather and sent back into combustion chamber. 

Since the gasses are in the crankcase some oil may be pulled up as well.

Or it could be something else. Just a thought. Home this helps and good luck with the repair.

 

Kilgore.

  • 2 weeks later...
Posted
On 10/26/2024 at 1:51 PM, Jim Kessell said:

I apologize to all who I left scratching their heads about my last post !!

Turns out to be fuel diluted oil coming from the breather.  I’ll be taking the carburetor off AGAIN !!!

Jim,

Have you checked oil level in engine? Does it smell like gas? If overful it could be sucked by the breather back to carb.

Posted

WB

I was hoping you would respond. 
It was definitely gas infused and slightly over full. Took the carb off and changed the float and needle valve.  Reworked the fuel solenoid.  I have it running pretty well now but was having the issue with the blow back. 

  • Like 1
  • 2 weeks later...
  • 4 weeks later...
Posted

WB

Merry Christmas to you and yours !

WX is keeping me in the house for now.  One thing that was obvious from the start is the exhaust has to be reconfigured to fit the machine. Search around the local marketplaces. 
I found my Predator on offer up for $100 bucks brand new. 

Posted

Hi Jim,

Merry Christmas to you and yours also,

I saw somewhere you can order flange with stub out for that engine. You might weld flex hose onto stub and run it wherever you have to. If i see it again i'll post it to you. Wow, where did you see that engine for $100. Might be a scam. check close.

 

  • 5 weeks later...
Posted

Is there any way that you could post close up pictures of where the springs would go and the rods on this eh65 engine

I took pictures but cant find them and I can get it to run but its not right imo

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...