Quantcast
Jump to content


EH65 spitting fuel from breather hose into air filter.


Go to solution Solved by Jim Kessell,

Recommended Posts

  • 4 weeks later...
Posted

I apologize to all who I left scratching their heads about my last post !!

Turns out to be fuel diluted oil coming from the breather.  I’ll be taking the carburetor off AGAIN !!!

Posted

Just like an old car or truck PCV valve.

PCV = Positive Crankcase Ventilation

Basically any gasses that blow-by the piston rings into the crank case need a place to go. So the PCV valve (one-way check valve) let the gasses out but doesn't allow any in. Usually a hose runs from PCV valve to breather and sent back into combustion chamber. 

Since the gasses are in the crankcase some oil may be pulled up as well.

Or it could be something else. Just a thought. Home this helps and good luck with the repair.

 

Kilgore.

  • 2 weeks later...
Posted
On 10/26/2024 at 1:51 PM, Jim Kessell said:

I apologize to all who I left scratching their heads about my last post !!

Turns out to be fuel diluted oil coming from the breather.  I’ll be taking the carburetor off AGAIN !!!

Jim,

Have you checked oil level in engine? Does it smell like gas? If overful it could be sucked by the breather back to carb.

Posted

WB

I was hoping you would respond. 
It was definitely gas infused and slightly over full. Took the carb off and changed the float and needle valve.  Reworked the fuel solenoid.  I have it running pretty well now but was having the issue with the blow back. 

  • Like 1
  • 2 weeks later...
  • 4 weeks later...
Posted

WB

Merry Christmas to you and yours !

WX is keeping me in the house for now.  One thing that was obvious from the start is the exhaust has to be reconfigured to fit the machine. Search around the local marketplaces. 
I found my Predator on offer up for $100 bucks brand new. 

Posted

Hi Jim,

Merry Christmas to you and yours also,

I saw somewhere you can order flange with stub out for that engine. You might weld flex hose onto stub and run it wherever you have to. If i see it again i'll post it to you. Wow, where did you see that engine for $100. Might be a scam. check close.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Buddee
      2010 Hisun 500 - Carbed'.  She sat for about 3 weeks since last use.  Couldn't get it started.... has spark but plug was not wet.  Bought new plug, cleaned the carb, confirmed fuel pump (pulse type) is working.  Still nothing.  Put gas in the plug hole.... started right up and idled as normal and drove perfect.  Used it for the rest of the day without issue.  Tried to start again next morning.... same problem.  Poured gas in plug hole again.... started up and best kind again.
      Anyone have any insight to what's going on?
    • By Jim Kessell
      Hi All
      2010 653cc
      Need any information on a Subaru Robins EH65 engine. Particularly the carb vacuum line to the bottom of the carb. I think it’s disconnected internally in the engine. 
      Thanks Jim
    • By Venom
      Hi All,
      I picked up an old beat up 2010 American Sportworks Bull Dog 300 BD300.  I would like to restore her...  Does anyone know a good source for parts other than the OEM?  I find $130 for brake pads is kind of unreasonable... I also need a steering rack and other things... I took apart the steering rack and it needs a new bearing and oil seal... Of course the OEM only sells the complete rack for over $200..  I found the correct bearing for $6.00. I am having trouble finding the correct oil seal.. 
      Anyone that has info on one of these machines, please chime in...  I am used to the ease of finding info on Polaris, Honda, Can Am, Kawasaki, etc.....,  Info and parts on these seems to be scarce..  Some of the parts on it look like Golf Cart parts as well as some look like Go Kart parts..
       

    • By vachi
      hi everyone i have this 2021 Hisun forge 250 that won't start. no spark no fuel.   when i turn the key on i dont hear the relays click or fuel pump come on. it does have power but the relay doesnt ground the pump or the ignition coil. dont know if there are any safety switches on this model or not.  it does crank and all the accessories work. i  hot wired the pump and it does work.  i found a wiring diagram but it's very hard to figure out and was hoping someone has seen this before. all fuses are good. thanks in advance. 
    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • By boydog40
      my subaru gave it up, bought a new Predator 670cc
      problems is, wiring the buggy to the new motor, OEM key switch has 5 wires (red, green, yellow, black and brown)
      new motor has many more wires than the Subaru and i have no idea what goes where!!!
      finding any info on the web is almost impossible to do also
      any help will be greatly appreciated!
      thanks guys
×
×
  • Create New...