Quantcast
Jump to content


Recommended Posts

Posted

Thanks for your help, Iv looked for one for hours a day, no luck an the Cub Cadet boys won't send me one like its a top secret thing lol .. you could be right but I'm unable to find anything not connected or corroded to many wires and color coding is not true .. frustratingly lost at this point I may have to take it to Cub Cadet .. grumbling!! Im sure that'll cost me but gota have it for winter hauling wood and cleaning snow from the driveway

  • Like 1
Posted

To find out which wire goes to the battery, use a continuity test. With the battery disconnected, and the key in the off position. Using a multi meter, set to ohms, run a jumper from the positive battery terminal, of the disconnected battery. Hook the jumper wire to one end of the meter, then probe all the terminals on the switch with the other. When you get a reading, there shouldn't be much difference between this reading, and just touching the meter terminals together. There'll probably be some difference, but not much. Then turn the key on, and find the next wire, that'll be the one that's always hot when running. Then the start wire is last. That should just about cover most of the wires on the switch, so you can track down the problem. 

   But from what I've read so far, it seems like a ground wire problem. But if you can't get continuity at the switch then it's obviously a problem on the positive circuit.

  • Like 2
Posted

@kenfain we tried that even tried a hot from battery still no power to the switch we can get lights to come on that way but nothing else .. chasing the wires is a task because there's so many and no slack in them what are friends for .. well they slip out with beer an tools and....... nothing lol we can't find the problem .. patients is at it's end haha I better drop it off at cub cadet before I push it over the hill .. everyone thinks its a secret relay hiding somewhere but no luck there either .. we're all baffled at this point  

  • Like 1
Posted

I spit some Beach nut in it's eye and shot it with my ole 45 lol haven't done it yet but Im taken it out to cub cadet when I have time but I will let everyone know what it was that shut'er done

  • Like 1
Posted
7 hours ago, uponahill said:

haven't done it yet but Im taken it out to cub cadet when I have time but I will let everyone know what it was that shut'er done

Ooh, I've never heard of that Restaurant before, Cub Cadet? Candlelight dinner?😍😜

😋B):lol::) 

 

Posted

just a thought, check the main inline fuse from battery. turn key to on position and give the wires a good rattle. I had a similar intermittent problem and could hear sparking across the fuse... changed the fuse and a clean up then no more problems.

my symptoms were clocks coming on and numbers flickering then nothing... no click no lights etc. and battery running flat because not charging. 

Keyif 

Posted

@keyif .. good idea and we already tried that, nothing .. its still sitting waiting for me to take it in to get worked on (guy side swiped me totaled my truck and trailer, trucks back I'm still cutting and welding on trailer to replace fender and axle) but between normal work an my other 2 experimental projects (deff not the kindof talk of this thread or board) and cutting wood to keep from freezing this winter I'm to busy to work on it now .. my friends still come over with a light bulb above their head smiling -> HEY I GOT AN IDEA!!! lol

  • Like 1
  • 2 weeks later...
  • 2 weeks later...
Posted

It probably is one of the rely's .  It was my problem.  I have been running mine wired on the one good rely.  I just have to make sure the headlights are off when I cut it off or the way I have it wired cutting off the switch doesn't cut off the headlights also. They stay on and I have to cut them off with the light switch.  For safety I put in a toggle switch that kills everything.  Before that I had someone turn on the headlights while I had it parked just about killing my battery. I was lucky it turned over just enough to get me started again. I haven't replaced the rely's yet because I don't know what caused them to go bad suddenly. I think I may have a short somewhere in the wiring. Looks Like I had a rat or squirrel or rat chew some of the wiring. Works and runs well on one rely, but know I'm pushing my luck. My charging system seems to be erratic since though. Sometimes my hour meter works and sometimes not. When it is working my battery is charging when it doesn't battery isn't charging. I hook a battery tender on it when parked and I haven't had problems with the battery cranking as long as the headlights aren't used for to long. At my age I don't do much night driving. 

 

Best of luck!!  Will be watching for the results in your search of a fix!!

 

John Taylor

  • Like 1
  • 2 weeks later...
  • 2 months later...
Posted

@Travis not yet, got some bad weather now, waiting until it clears up, I just used my TJ w a  small trailer to load wood up an take it to the house this year

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
×
×
  • Create New...