Quantcast
Jump to content


Recommended Posts

Posted

 

After replacing the cigar box sized battery in my Mule for two years in a row (at a cost of about $80 per trip), I decided to mount a deep cycle group 24 behind the front seat.

Bought a sturdy battery holder, a couple of 32" cables and voila!....no more battery blues

I usually get about three years out of one of these. 

Also installed a 2 amp trickle charger.

Me so happy.

  • Like 2
  • 9 months later...
Posted

Deep cycle batteries are designed for low current draw over long period of time such as trolling motors, winches, solar power supplies and golf carts.  Car engine starting batteries are designed for high current draw over short duration.  I don't know how your deep cycle battery will perform.  Deep cycle batteries have thicker plates to provide more current over longer periods of time.  Car starting batteries have thinner plates.  Exposes the plates to more electrolyte so as to provide the high current demands.  I imagine if you oversize your deep cycle battery, it will probably work as long as a starting battery would (but cost more).  At least your deep cycle battery might power your winch longer before it can't start your engine.

Posted

Operating a winch under load should always be done with the engine running. Those things draw an outrageous amount of amps when under a heavy load. I learned that lesson the hard way. As to the battery issue, I'd check the alternator output, vs. amp load. If you're using a lot of amps on accessories, winch, lights etc. you might want to upgrade that alternator. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By KimAC
      I need a pair of front shocks for a Landpride Treker 4200NT, from 2005?  Does anyone know of a good salvage yard - or another source?
      The old shocks have "SEBAC 11685 12 3" stamped on them (or something very close - it's hard to read). I think SEBAC are (were?) an Italian company.
      Is there a compatible shock I can use? I don't have easy access to a scrap yard where I can compare shocks etc.
      Thanks,
      -Kim
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By John Gubancsik
      I'm having trouble finding a replacement battery for my UT400.  Has anyone bought one and where did you get it?  Thanks.
×
×
  • Create New...