Quantcast
Jump to content


Recommended Posts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Hunterman22
      View File Hisun Axis 500-700 Service Manual (2020 Version)
      This is the 2020 updated version from the previous 2009 version.  I do not know all the differences.  I do know the 2020 models have throttle body , idle air control valve, & idle control sensor. 
      HS700UTV-4/HS500UTV-4 Hisun Axis 500-700 Service Manual 
      Submitter Hunterman22 Submitted 08/10/2024 Category Hisun  
    • By Robert Scott
      I've had a Hisun HS500 (Axis 500) that I bought at Lowes almost a year ago.  I have downloaded the service manual found on this forum and notice that they have 2009 and 2010 year dates on them.  Isn't there a newer version available somewhere?  I'm about to try my first ever valve adjustment and am wondering if the info is the same.  Mine is fuel injected but there is carb info in those manuals.  Don't know if they still have carb models now but figure they did then.
      Thanks
      Bob
    • By strike250
      I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if  you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
       
      Matt

×
×
  • Create New...