Quantcast
Jump to content


Headlights Cub cadet 750 crew

groged67

By groged67
in Cub Cadet UTV SxS Forum

 Share

Recommended Posts

groged67 Rookie

groged67

Posted
Posted

I recently put high output LED lights in my Cub cadet 750 crew. It took some JB quick weld, drink tube, and screwing up some but is working! Opt 7 H4 bulbs are about three times brighter than the cheap China motorcycle bulbs!

 

I will post some pictures soon!

 

Does anyone else have battery issues? I am going to try fitting a Optima marine battery in mine. A real alternator would be a better fix. Anyone try solar to top batteries? When I plow snow the stock battery is fried quick!

  • Like 1
  • Alex changed the title to Headlights Cub cadet 750 crew
  • 6 months later...
redwood61 Rookie

redwood61

Posted
Posted

I did the same to my Volunteer 440. with LED lights.  I use those and a pair of wide angle lights on my roof rack.

the size of the battery is small so every 3 years I have to replace mine,  a charge when it's cold out overnight is helpfull.

 

to a happy season ahead. !

 

redwood61 Rookie

redwood61

Posted
Posted

on a recent hunting trip, my radiator over heated on my Cub Cadet (diesel model)   I replaced the relay  for the fan. !

any idea's what I should be next.   it's 10 years old,  would the fan be a random replacement item ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • CapnWalleye
      2016 Cub Cadet 500 runs rough
      By CapnWalleye
      Just picked up a Cub Cadet 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • clint501
      Hisun E1 charger not working
      By clint501
      I recently purchased a Hisun E1 and the other day the charger stopped working properly. The LED on the dash blinks red & green and the light on the side of the charger also blinks red & green. The fan on the charger does not come on like it used to do. There is no error code that I can see. Does anyone have any suggestions to remedy this?
    • Gary Odom
      Tracker 800sx crew 2023
      By Gary Odom
      Noticed the radiator reservoir has a pin hole leak at the seam. unit has less than 600 miles. Anyone else have this issue.
    • Croppy38
      Challenger 750 flywheel issue
      By Croppy38
      I own a 2017 Challenger 750 and had the key way snap at the flywheel. It was removed and cleaned up and then the  flywheel was put back on with a new keyway. It snapped a second time so the flywheel and keyway both were replaced. They both seem to fit nice and tight. Put it all back together and it snapped again. I have no idea why it is doing this. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...