Quantcast
Jump to content


Parts for sale: 1100 short block, tranny, diffs

2scoops

By 2scoops
in Joyner UTV SxS Forum

 Share

Recommended Posts

2scoops Proficient

2scoops

Posted
Posted

Bought a renli 1100 that was involved in a fire. Have some parts for sale :

Chery 1100 short block motor turns well. Definalety rebuildable. imageproxy.php?img=&key=782fd66f4fb329f2

Transmission will need new sensors and maybe seals. 

Kinarfi Veteran

Kinarfi

Posted
Posted
On 2/17/2018 at 10:56 AM, silverbullet said:

silverbullet.

please send picture of all parts.Try to give me  picture of cylinder walls,transmission ,rear differential.

Send to [email protected]

Thanks Rich

If you're going to do that, take your photos and put them in google drive and share the folder so we can all see what you have.

Jeff

Damage442 Apprentice

Damage442

Posted
Posted
Bought a renli 1100 that was involved in a fire. Have some parts for sale :
Chery 1100 short block motor turns well. Definalety rebuildable. [/img]
Transmission will need new sensors and maybe seals. 
Differentials. These are same as troopers except they are tapered down where the axle connects. All other parts should be identical gears housing etc. They may fit newer troopers since Joyner went to smaller axles on later models. 
Will this tranny work for an 08 Joyner T2 1100cc?

Sent from my SM-N920T using Tapatalk

  • 2 weeks later...
2scoops Proficient

2scoops

Posted
  • Author
Posted
On 2/21/2018 at 4:32 PM, Damage442 said:

Will this tranny work for an 08 Joyner T2 1100cc?

Sent from my SM-N920T using Tapatalk
 

Should be the exact same transmission. I am sure Google could answer for sure. Same engine same transmission as the T2. 

2scoops Proficient

2scoops

Posted
  • Author
Posted
On 2/18/2018 at 4:22 PM, Kinarfi said:

If you're going to do that, take your photos and put them in google drive and share the folder so we can all see what you have.

Jeff

Yeah, I did try and post some on the site but the file was too big. I will work the Google drive thing when I get time. 

silverbullet Experienced

silverbullet

Posted
Posted
On 2/21/2018 at 4:32 PM, Damage442 said:

Will this tranny work for an 08 Joyner T2 1100cc?

Sent from my SM-N920T using Tapatalk
 

  silverbulletmotor. Will fit all 1100 5 speed buggy. let ma know i have a need for good block and heads.even 800 cc engines.

Thanks Rich

silverbullet Experienced

silverbullet

Posted
Posted

silverbullet

We may be  interested in parts.Please send pictures of all the parts.We have a new  service.Rebuilding engines and cylinder heads in house. including Hi Performance engines.We will need a good block and head core you send  head we check Cylinder head with a straight edge  special service in  650,800,1100 cc .We will stock 1 engine a  1 hi performance head.We can offer the complete head in stock.

Your // Machine shop they will bore the cylinder and resurface the head if warped.We will let you know.1100cc head almost done.Keep in touch with me

 

ThanThanks Rich

Damage442 Apprentice

Damage442

Posted
Posted

I am interested in the tranny.

also do you have the trailing arms from a T2 you may want to part with?

Call or text 7163781352

please send pics and prices...ty

  • 2 weeks later...
2scoops Proficient

2scoops

Posted
  • Author
Posted

I just got the tranny out and will contact you soon. What shape are your trailing arms in? I don't have any but I can show you where I reinforced mine. I have never had any issues

 

Damage442 Apprentice

Damage442

Posted
Posted
I just got the tranny out and will contact you soon. What shape are your trailing arms in? I don't have any but I can show you where I reinforced mine. I have never had any issues
 
My trailing arms are shot, they are bent up bad. I want to get new ones and have my Welder reinforce them.
I would like some pictures and price for the tranny...lmk when your ready

Sent from my SM-N920T using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Frank in MI
      New old guy
      By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • hisun junk
      2017 Cub Cadet Challenger 750 hisun junk motor
      By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • Poppateets
      New owner with questions
      By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • Eagle Mountain Outfitters
      NEW Rear Foldable Cargo Basket designed specifically for the Mule
      By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • Hunterman22
      2021 Hisun Axis 500 No Start - Need Help Please
      By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...