Need help converting

[Travis]

Going to try to measure the rotor clearences on the oil pump. manual says:

(Use feeler gauge)

 Standard: Less than 0.14 MM

 Service Limit: 0.3 MM

and i cant find a  0.14 mm feeler gauge.

 ?????

i think, if my math is correct it comes out to .005?  5 thou?

Edited May 25, 2018 by Travis
Solution

[kenfain]

5.5 and some change according to google.

[Travis]

Thanks a bunch!! 

[Dan B]

What machine are you working on.  I'm wondering if my low oil pressure at idle has excessive oil pump clearances.  (Joyner Renegade 1100cc)

.14mm is 0.005512"

[Travis]

my 01 Mule 550.

 Very well could be, what year is it?

 The oil pump on my mule is driven by the cam.

[Dan B]

I have a 2014 Joyner Renegade with the Chery 1100cc engine.  It appears that the oil pump is driven directly from the crankshaft.  I'm going to try a heavier weight oil (40 or 50) to see if that improves my idle oil pressure (it's at 10 psi, bare minimum).