Quantcast
Jump to content


Strike 250 wheels and sand paddles

r33pwrd

By r33pwrd
in Hisun UTV SxS Forum

 Share

Recommended Posts

r33pwrd Newbie

r33pwrd

Posted
Posted

So bought the kids a strike 250 and we live close to some small dunes and the thing does not like sand with the stock tires.  I was thinking about a set of sandstars for the rear but having a hard time finding wheel specs on the 250? Anyone know bolt pattern and offset of the factory wheel?

 

Thank you Brad

Link to comment
Share on other sites
  • 2 weeks later...
strike250 Community Regular

strike250

Posted
Posted

Hello Brad,

 

Yes, the Strike 250 stock is a little underpowered. Do you happen to have one of the newer models? The reason I ask is because on my website we are able to unlock your ECU with the factory software, this allows you an additional 2000 RPM! As well as a higher top end speed. This will help you with the sand dunes as well.

As for the wheel specs, they are 4 x 156 on the front, and 4 x 115 on the rear. Check any Yamaha banshee or raptor site for wheels, as either will fit just fine. 

Check out www.warriorsoffroad.com for a bunch of additional info for your Strike 250

Matt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Jon V
      reassemble Cub Cadet Challenger 700 - Crankshaft does not turn freely
      By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • Duncan
      utv tires
      By Duncan
      I got a utv from lowes it has one tire in the back that is the same size as the front tires so it has 3, 26-9-14 and 1 26-11-24. i want to change the rear tire to the same one as the other.So instead of buying a new rim will a 26-11-24 tire fit on a 26-9-14 rim.
    • Red Good
      Having trouble sorting out this massimo utv
      By Red Good
      Serial # a8mv86futja001002 , no search engine will give me a model , it has a 471 engine . Is massimo always hard to get hold of ? No answer to emails or phone calls ?
    • camojay
      Hisun Sector 450 (2021) - help diagnose rear diff issue (short video included)
      By camojay
      When we first heard the noise, we immediately stopped driving it...at first we thought it might be a linkage issue, but after further inspection looks like the sound/jolting is coming from the rear diff. Took a video below...
      Anyone know what is creating the diff to skip/jump like this? We drained the diff oil and didn't look terrible, no metal.
      Other info that may be useful:
      1400 miles on it
      Recently tightened the E brake
      P.s. never posted on this forum before, let me know if the video does not work
      20240817_133539_1.mp4    
    • mac66
      Anyone have a Bad Boy Bandit?
      By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...