Quantcast
Jump to content


Recommended Posts

Posted (edited)

I have a 2008 Cub Cadet sxs..love it. It's basic,has a hydraulic dump box,(which is really useful),I use it for breaking trails on my property,hauling firewood,and use it all year round. We have quite a bit of snow up here  in Northern Ontario,and have ONLY had it stuck once,when there was no where to hook the winch to.I do wish it had a little more ground clearance,and taller tires,for the mudholes,but honestly?..for being the FIRST atv that I have ever owned..(I bought it used with 240 hrs on it)..it has been everything I hoped for.The throttle is a little twitchy,but once you get used to it,the damn thing is a tank,and will crawl through almost anything.Would I buy another??...absolutely!..It's NOT the fastest thing out there,topping out about 30kph,..But when other atvs get STUCK!..I am the go to guy,to pull them out..bulletproof so far,and other than replacing a front wheel hub,(it was cracked from the previous owners farm use) problem free.If you want SPEED.the Cub isn't for you...but if you want tough!..reliable,and trustworthy..it's a really good bet. The Kohler 31hp gas engine seems bulletproof so far..I hope this helps your decision..any more questions,just post,I will try and give the lowdown on my ownership so far

Edited by amoore
  • Like 1
Posted

Yes I have the same unit with the 20 hp Cat. Diesel engine.  it's been good . I use it in the fall for hunting and winter for snow removal.   you want a local person to service it.  as the dealer is quite expensive.

It's hauled everything. !   it's built a little heavier than your average UTV.  

Darrenw 4 by 3.jpg

cub cadet winter.jpg

  • Like 1
Posted
  On 10/1/2018 at 3:18 PM, redwood61 said:

Yes I have the same unit with the 20 hp Cat. Diesel engine.  it's been good . I use it in the fall for hunting and winter for snow removal.   you want a local person to service it.  as the dealer is quite expensive.

It's hauled everything. !   it's built a little heavier than your average UTV.  

Darrenw 4 by 3.jpg

cub cadet winter.jpg

Expand  

What type of lights are on the top

Posted

Thanks  we gir te moose in 2014  t cub spent 4 hours pulling it 10 ft st a time towards the road .  Somewhere are those pictures a once in a life time event.   So its paid its do.  Now go out a get that 10 pointer.  Ps we only count one side in Canada .  Another 40 days and t snow blade goes back on.  Order lots of snow !

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Paul L
      When I am driving at 30 to 40 mph on the highway, the display will change from H (high) to R (reverse).  It does not actually shift into reverse, it seems to shift into neutral and starts losing speed and the gas pedal has no effect.  After the rpm/speed drops for 5 seconds or so, it changes back to H and runs fine for another minute or so.  You have to try to drive it at less than 5000 rpm or so, to try and keep this from happening.  Any ideas on what the problem might be?  It only happens at the higher speeds.
    • By Unhappy Kioti K9 Owner
      I own a K9 with 50hrs that has been in for repair more than once the farm.  Multitude of issues, trying to file lemon on it but interested in knowing if owners are organizing for a class action suit.  The dealer informs me there are “a lot of owners very unhappy with these”.
      Thanks
    • By CapnWalleye
      Just picked up a Cub Cadet 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
×
×
  • Create New...