Quantcast
Jump to content
This Topic


500cc Starte

Jojo64

By Jojo64
in UTV General Discussion

 Share

Recommended Posts

Jojo64 Newbie

Jojo64

Posted
Posted

Starter on Ranch Pony 500cc burnt and already ordered 2 from BMS that are wrong size which is a problem returning for refund. Had same problem returning with one way bearing on starter clutch. Just wondering if anyone would know of a compatible starter maybe artic cat or honda or other.
Thank you for any help.

  • Like 1
motojoe Explorer

motojoe

Posted
Posted

Just look on your original starter motor for a manufacture's name or a part number, then look up the part number on google and buy it from any of the vendors that come up BMS is usually way over priced.  I have a ranch pony and have really good luck with it but most of the parts from Chinese side by sides use the same parts. 

  • 4 weeks later...
Greg Kilgore Community Regular

Greg Kilgore

Posted
Posted
  On 10/12/2024 at 12:50 PM, Joe Breaux said:

Have yours rebuilt

Expand  

Agree with this.

Rebuilt from local, reputable shop is good for local economy and you get better workmanship 99.99% of the time.

10 or more years ago, was needing a replacement alternator for car. After getting 3 or 4 from auto parts store that didn't last 1-2 months. Thankfully they had 6 month warranty. The last one I got, I took straight to the rebuild shop. Cost an additional $50 but lasted until I sold the car 2 years later.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • bms stallion owner
      BMS UTV sluggish acceleration issues/ final gear oil maintenance concerns
      By bms stallion owner
      hello, my BMS Stallion 600 is having accleration issues. the manual fails to show final gear oil diagrams very well... I have the owners manual and suspect issue is associated to transmission , I want to check the level of the gearoil. I located a drain plug (but not the fill plug nor dipstick). It will run - but wont exceede 2mph. Troubleshooting suggestions or comprehensive manual suggestions? Thanks
    • The Road Hound
      Which UTV?
      By The Road Hound
      Hi, 
      New to the forum. 
      Came here looking for some experienced UTV users who can enlighten me about which brand should I pick for my very first UTV or SXS. 
      I'm between 3 brands and 3 models: 
      *Kawasaki MULE PRO-FXR   1000.
      *Yamaha wolverine rmax2. 
      *Can am Commander XTP. 
      The use I'm willing to give it is mostly to go to the range with my wife, load steel targets and all our shooting gear, we shoot a lot, rifles, Shotguns and Handguns for practice, training and competition. (Range is about 10 miles from home) 
      But also I want something that I can take to the trails and have fun on dirt, mud, rocks, puddles or creeks. 
      Any objective information will be appreciated, specially which is more reliable and durable. 
      Thank you and happy 4th of July. 
       
    • SayHiToRambo
      Help diagnosing problem
      By SayHiToRambo
      08 trooper 1100
      Bit of background. First the machine would take for ever to start. So I adjusted the valve shims into spec and made sure the timing is correct. Starts perfectly now. 
       
      now it fluctuates on idle. Bogs down, Revs up, repeat. I noticed the fuel pressure drops from 60psi to 20psi while that happens. It also bogs down at the lower end of each gear, higher rpm seems to be fine. Seems to struggle under load. In neutral it revs up perfectly. 
       
      brand new fuel pump, fuel filter, gas. I noticed on the fuel pressure regulator there’s that vacuum nipple, it’s not attached to anything and I’m not sure where it would go. Possibly the problem? 
       
      Another issue is the tip off the end of the exhaust is broken off, sensor is still attached and connected. Could that cause these issues? 
       
      my next plan was to look into the pressure regulator and voltage to fuel pump while driving. Is there anything I’m missing or any ideas you guys have? 
       
      thanks! 
    • allinone
      Which Forum is best for Crossfire GT400 aka Hisun 400 same as others
      By allinone
      Recently purchased 2nd hand not going Crossfire GT400 (Australian branded name?) 2020 model.  Has some issues what would be the best forum to pose questions.
      Thanks
    • Clayton Walker
      Im New here but just got my Uforce Fitted for Hunting Season
      By Clayton Walker

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...