Quantcast
Jump to content


2009 Joyner trooper fueling problem

Whisper Snowbird

By Whisper Snowbird
in Joyner UTV SxS Forum

 Share

Recommended Posts

  • 1 month later...
Dan B Community Regular

Dan B

Posted
Posted

Can you connect a fuel pressure gauge to see if it takes a long time to build fuel pressure?  Could be a fuel pressure regulator leaking internally or the fuel pump itself not providing sufficient pressure soon enough (slow build up of pressure).  On  my Renegade (same engine as the Trooper), I have to wait about 5 seconds  with the ignition on before I can start the engine.  That gives time for the computer to boot up and  the fuel pump time to build up pressure (I can hear the fuel pump run  for about 4 secs, then turn off).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • shepdog
      2009 BMX UTV 500 Coolant hose
      By shepdog
      I just picked up a 2009 bmx utv 500, there is a small 'nipple' on the water pump, its barbed like a hose goes on it , where is that little hose Suposed to go? 
    • weasel
      Coleman 400 UTV fuel issue
      By weasel
      starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.
    • Sisco
      2016 cub cadet challenger efi fuel pump
      By Sisco
      Does any have a part number for the fuel pump sock for a 2016 challenger 700 efi. Does not show on any parts diagram but the old pump has one on it.
    • sxr951
      anyone ever have to beat your starter out with a hammer till it broke in half?.lol
      By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

    • Jason S
      2022 Bobcat 34XL Brake pedal depress to start getting impossible
      By Jason S
      Good afternoon,
      I have a 2022 Bobcat 34XL.  Over time, I have to press harder and harder on the brake pedal before the ignition will fire. Now I have to practically stand on it with all my weight to get it to start.  Does anyone know if there is a spring or something that might need replacing, or have had this issue before? I don't have any schematics of the brake sensor/assembly.
      TIA

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...