Quantcast
Jump to content


Anylizer

Anylizer

By Anylizer
in New Members Area

 Share

Recommended Posts

Anylizer Enthusiast

Anylizer

Posted
Posted

Just found out about this place thanks to Brostar. Hello again to those of you who know me, and nice to meet you for those who don't. I am a Joyner dealer and will chime in with relevant info if I have any. If you have any questions I'll help out in any way I can. Ride on ....... Tim

brostar Proficient

brostar

Posted
Posted
Just found out about this place thanks to Brostar. Hello again to those of you who know me, and nice to meet you for those who don't. I am a Joyner dealer and will chime in with relevant info if I have any. If you have any questions I'll help out in any way I can. Ride on ....... Tim

Good to have you here Tim, the place wouldn't be the same without you. There has already been alot of good posts with plenty to get on with and all without you know what in between. UTV Board is easy to navigate around plus new ideas are welcomed by the staff here & with just discussing Joyner talk by Joyner people, it's a pleasure. Enjoy. I'll send you a PM soon.

Cheers Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Poppateets
      New owner with questions
      By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • Cory J
      2023 t-boss 550 belt slipping and found oil in belt housing
      By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • SouthernGypsy
      Help needed, Anyone recognize where this Internally Threaded Bolt belongs?
      By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • JOSEPH LAMAR
      Please help me solve this
      By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • Texjpr
      Help! Hub safety-hour meter switch problem
      By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...