Quantcast
Jump to content


Odes experience


Recommended Posts

  • 2 weeks later...

Well, let me tell you my experience. I bought a new Odes Comrade. All was fine for about the first 10 hours, then I noticed it was popping back through the intake. Took it to the dealer twice for that. Then, it left me in the woods, I had to call someone to come get me. Took it to the dealer. He found that the battery ground, was attached against a plastic battery box, and was reliant to the bolt to go to the frame. The mechanic moved it to another location. I went back to the woods. It was still popping back through the intake. After I was through hunting, a week later, I carried it back to the dealer and told him no hurry, but when I picked it up, I wanted it fixed. A month later, he called and said he had done all he could do. He said the factory could offer no help, and that there was not any way to go into the computer and adjust the fuel mixture. He had changed the fuel pump, injector, the electronics and tried several heat ranges of spark plugs. He called to other dealerships, and in the end, they told him, that engine just did that, and there was nothing that could be done with that. I picked it up and emailed Odes, telling them what was going on, and I wanted my money back. Mike Smith first, tried to tell me that I had voided the warranty by changing my own oil. He finally said he would send a factory mechanic, with a fully stocked truck, tools and instruments, to repair the unit. 10 days later, a man showed up in an old car with a back pack of tools and a cardboard box full of parts. He worked on it several hours, and said it was fixed. They told me he had put the 3rd fuel pump and injector on it, replaced the electronic brain again, put a new key switch in it, and changed the spark plug. When I got there, it was worst than it had ever been. I would start and die., start and die, and on the third time, it would stay running. It did this every time it had set up for several hours. Oncfe it was running, it was pooping back through the intake, plus, it was now back firing through the muffler. I began to demand my money back or I was going to file lemon law. This unit also had headlights that would not adjust right, It pulled to the right, plus, it was delivered to me with almost 30 psi air in the back right hand tire. I did not notice the tire, until it was extremely worn, I was told it was ready to go, when I picked it up. Who would have thought they had not checked the tire air pressure. Odes would not replace the tire, and I had to pay for it. Odes would do nothing about the front end pulling so bad, and the mechanic could not adjust it out of it. It took a lot it?of emails and arguing, but Mike Smith finally agreed to refund the invoice amount, and my dealer had already said he would refund every cent I had spent. Well, Mike Smith drug his feet, made excuses, but finally did send the money to the dealer, who gave it to me. BUT, the dealer then reneged on his statement to refund every penny I had spent. He would not refund even 1 cent of the mark up. First he claimed that he thought Odes was going to refund it, then, he explained that Odes had not paid for 1 minute of the labor, that his mechanic had put into it. I told him that was between him and the dealer, but no consumer anywhere, was every expected to pay for warranty repairs. I tried to negotiate with the man, but he would not budge. Monday, if he has not contacted me with something, I am filing in Small Claims Court. There is not one competent business man out there, who would expect the manufacturer to refund the dealer markup. That does not even make good nonsense. 

Does anyone want to buy a rear factory tire, for the Comrade, with about 2 miles on it?

I do not recommend Odes or Mike Smith, to anyone. If they would have manned up and replaced the unit with another, or just refunded my money with out a fight, or if they had competent service people to help you, I would not feel this way. Heck, when trying to find out what specific engine oil to use, one of them told me to use GL5, which is 90 weight rear end lube. I can't make this stuff up. 

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

When an engine backfires through the intake or exhaust, the FIRST things I would check is compression.  I would expect it to be low due to possible intake and/or exhaust valve not seating or the valve timing has skipped a tooth on the timing belt.  A second possibility is ignition timing - firing before the intake valve has closed.  Changing  your own oil voids your warranty?  They're looking for a scapegoat for their ineptness.

  • Like 1
Link to comment
Share on other sites

On 4/21/2019 at 7:17 PM, Dan B said:

When an engine backfires through the intake or exhaust, the FIRST things I would check is compression.  I would expect it to be low due to possible intake and/or exhaust valve not seating or the valve timing has skipped a tooth on the timing belt.  A second possibility is ignition timing - firing before the intake valve has closed.  Changing  your own oil voids your warranty?  They're looking for a scapegoat for their ineptness.

No joke about the oil change. Mike Smith himself said that. The dealer changed spark plugs(several heat ranges), adjusted the valves, changed the switch, injection computer, fuel pump,. injector, plug wire, we moved the battery ground, and other stuff, but nothing helped. The lack of factory help is a big no-no. Just try to find a phone number to call someone. And if you find one, don't cross your fingers waiting for them to answer. They are a small company with a big mouth. 

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By shepdog
      I just picked up a 2009 bmx utv 500, there is a small 'nipple' on the water pump, its barbed like a hose goes on it , where is that little hose Suposed to go? 
    • By lmarkie
      I swapped out the Subaru motor for a Predator 670cc. If I remove the heat shield around the muffler, The stock muffler sits in there just fine with 1" to spare.
      Only problem is the exhaust exit is toward the back seat instead of out the back.
      Do you all think that the stock exhaust would be okay (just as effective) if cut a hole and welded a pipe on the reversed (opposite) end? Of course, plug the old exit end. Other option I thought of was to roll a tube 180° with a 7" center line radius and finish extention of 12" or so.
      Any thoughts?
    • By Greg Kilgore
      Was at Lowe's over the weekend. The wife and I seen they have a new Axis 550. That thing is sharp. Has a complete door. Speakers in door. Bigger engine. Bench seats. New styling all the way around. Looks to be more air tight than my 2022 model. I really like the looks but $10k is out of my price range for now. Unless I could sell mine. And the resale on the Axis 500 is nothing.
      Went to the local wally world today. See a 4 person Polaris General 1000 on the back of a trailer. That Polaris looked exactly like a stretched version of the Axis 550. Even down to the vents in the windshield.
      Just wondering if anyone can confirm or deny the Axis 550 is a copy of the Polaris?
    • By mac66
      I bought a used 2021 Axis 500 last April.  Low mileage and got it for considerably less than what they go for new.
      The first thing I did was change the oil/fluids and also put a new drive belt on it.  The only other thing I did to it was add a rear vinyl window that zips open and rolls up to keep the weather off.
      I used it on my 52 acre property to check trail cameras, service the food plots, haul fertilizer, seed etc etc. It's has a good size bed and is not too big or small.  It has worked well as a utility vehicle. 
      Other than using on the trails working around the property I haven't used it much off road...at least until last weekend when I went on 74 mile group ride around the county. In my state it's legal to ride on any road that's not a state or federal highway. The group started in town, rode about 30 miles on back roads to the state ORV trail system. Then did about 20 miles on the trails and then headed back via back roads to town.   
      It had rained for 2 days straight prior, so the trails were one mud hole after another.  It was very challenging.
      The good...
      -It worked fine, never had any kind of issue with it since I bought it.
      -It kept up with more expensive machines on the trails. I was the only one with a CCC (Cheap Chinese Crap) machine.
      -Fairly comfortable to drive.
      -The roof, windshield and rear window kept most of the rain off when it started raining in the afternoon.
      -Okay, I cheated. I peeled off the AXIS 500 stickers on each side. Everybody in the group assumed I had a Rhino. They didn't ask, I didn't tell.
      The not so good...
      -The horsepower rating on the 500-cc engine is 24 hp but it seemed underpowered. While I could go about 35 mph with the pedal to the metal on pavement and hard packed dirt roads the best I could do on loose packed roads was 27 mph. I had trouble keeping up with the others in the group.  It also bogs down on inclines in high gear.  On the other hand, in low gear and 4wd I didn't have any problems going through mud or sand or up hills.
      -It is LOUD! Had to wear shooting earmuffs to keep my ears from ringing while riding. Going to have to address that.
      Overall Impression...
      I was impressed with it on the trails, and it is a good utility vehicle for working around the property. Considering what I paid for it I am very happy with its performance.
    • By Isaac
      I have a 2013 odes dominator when I get in it.  It ideals fine but when you give it gas it bogs and goes and bogs and won’t go passed 30 can anyone help me 
×
×
  • Create New...