Quantcast
Jump to content


Recommended Posts

Posted

I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 

What should I consider that won't break the bank?    

Posted
12 hours ago, Joe Breaux said:

A tarp?  It will take a fairly large shed to have a big enough door and tall enough. Those tend to be pricey.

I guess, but would like to have something a bit more user friendly and less susceptible to critter invasion and destruction.  

Posted

I've used what I think is the easiest solution: 2" PVC pipe and the connectors to create 4 legs and the top crossbars and then two tarps laid over 90 degrees from each other. It makes a great shelter and is cheap and easy plus it can be sim,ply taken down and stored for the Summer, if desired.

Posted
2 hours ago, Captaon Bob said:

I've used what I think is the easiest solution: 2" PVC pipe and the connectors to create 4 legs and the top crossbars and then two tarps laid over 90 degrees from each other. It makes a great shelter and is cheap and easy plus it can be sim,ply taken down and stored for the Summer, if desired.

Any pics?

Posted

Unfortunately, no. It was such a simple setup I didn't take any.
I've since bought an enclosed trailer and my UTV spends the winter (on a trickle charger) in that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
    • By dman66
      My buddy has a ut400 that the forward gear keeps popping out of gear. She only has like 400 miles on the odometer .the shift cable has been adjusted and the shift lever has been updated / modified. All other gears are good. Is there an internal detent cam or something that wears out or shift fork that can be replaced ? Or is there some other magic that I can perform ? Looks like the engine needs to be split.
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
    • By PossumTruck
      Greetings,
      I have a client that wants me to install a heater of some sort to aid in cold weather starting (she uses it at her business, has had issues starting the last few days in sub-zero). I would prefer a coolant heater to a pan heater (silicone pad), but I cant for the life of me find the diameter of the coolant hoses. Heck, I'm not even sure if it would work as well in this application given how long the hose is compared to tractors and trucks I have installed them in. 
      Any advice you could give me would be GREATLY appreciated. 
×
×
  • Create New...