Quantcast
Jump to content


2006 Joyner 650cc Commando Shift Cables

bmoody4550

By bmoody4550
in Joyner UTV SxS Forum

 Share

Recommended Posts

bmoody4550 Apprentice

bmoody4550

Posted
Posted

I recently got a 2006 Joyner 650cc Commando. It was not running when i got it.

I put a new fuel pump and alternator and is up and running.

My problem is when I originally got it started it seemed I didn't have 1st gear.  I was able to get it moving from 2nd and was sure I got it into 3rd.

In my process of diagnosing the first gear issue and I realize I have first gear because it is where I thought 3rd gear was. But now I don't seem to have 3rd or 4th gear.

The shifter itself seems sloppy and needs a little rehab if that is possible. Replacement available?

Cables are worn so I don't know if they have too much play to properly shift. Can't seem to find any cables available to replace. 

Can someone tell me which cable should be first and second and 3rd and 4th? One is black and the other is red.

Ultimately it may be a transmission problem internally.

As long as I have 1st and 2nd the machine will work for me going through the woods picking up wood.

Any help is greatly appreciated.

New to this if you can't tell.

Thanks

 

 

  • Alex changed the title to 2006 Joyner 650cc Commando Shift Cables
  • 4 months later...
EasternOregonSUV Rookie

EasternOregonSUV

Posted
Posted

Did you get your Joyner going? Ours is torn apart and we cannot figure out how to get the shift cables reattached. Can anyone out there send us a picture of how the cables are attached at the transmission end? Thank you.

bmoody4550 Apprentice

bmoody4550

Posted
  • Author
Posted

Yes, I got my machine running without a transmission issue, have all gears now.

Gears had been moved manually so I had to figure out how to get them back in sync with the actual shifting lever.

I don't have any pictures of the linkage right now. Maybe this weekend I will have time to take a couple for you.

Bill

  • 1 month later...
Bill Moody Newbie

Bill Moody

Posted
Posted

Here are some pics of the linkage. Seems like they can only get connected one way.

Sorry for the delay but It was warm out this weekend so I could uncover unit and get a couple of pics for you.

Good luck

 

UTVshift2.jpg

UTVshift1.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Jim Kessell
      EH65 spitting fuel from breather hose into air filter.
      By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • vachi
      2021 hisun forge 250 no spark no fuel
      By vachi
      hi everyone i have this 2021 Hisun forge 250 that won't start. no spark no fuel.   when i turn the key on i dont hear the relays click or fuel pump come on. it does have power but the relay doesnt ground the pump or the ignition coil. dont know if there are any safety switches on this model or not.  it does crank and all the accessories work. i  hot wired the pump and it does work.  i found a wiring diagram but it's very hard to figure out and was hoping someone has seen this before. all fuses are good. thanks in advance. 
    • Robby
      2013 hisun 500 efi utv. No fuel, no spark
      By Robby
      Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.
    • Ductking1
      2024 Hisun Sector 550 gear sector binding
      By Ductking1
      I recently purchased a 2024 Hisun 550 Sector from Kreps Service Station and am having issues with the gear selector, I am doing as instructed in the owners manual but the shifter acts like it is binding or the button lock isn't releasing, the shifter will not move, I have to wiggle it back and forth while pushing hard on the brake and if it's in park or reverse it's nearly impossible to get it to move, I contacted Justin Krep and he says this is normal with these machines, I find that hard to believe, I've owned many utvs and side x sides and have never had this kind of issue with any of them, any help with this problem would be greatly appreciated.
    • Nutcase
      Joyner trooper Fuel injection
      By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...