Quantcast
Jump to content


Recommended Posts

Posted

Maybe all are aware of auction and equipment sales scams.  On another forum, I've done some research on scam auction sites for big ag equipment and have noticed that it has spread to autos and smaller stuff in the past year or two.   One was very sophisticated, including stolen IDs of known persons giving rave reviews of the auction site many going back several years to lend credence to the fake site.  The site was in fact less that one month old. The business address was a storage facility with no signage with a couple being just high rise office buildings.  The three I've looked into have used this three initials plus "auction.com"  format or similar.  "XXXauction.com". Ran across a new one 2 weeks ago in Craigslist.  Had some nice cars and trucks at auction, but visiting their auction site, the all too familiar red flags were all there and despite claims of 20 years in business the site was set up first week of November 2014.  

First big clue and giant red flag is the prices shown. Usually 40% of what the equipment is worth, maybe less. 

Red Flags:

  • Prices are exceptionally low.
  • Absurd delivery fees ie; 60 cents per mile, or $500 flat fee, anywhere in the US.  Moped or Army tank, all the same.
  • Some buttons on site do not work.
  • Auction closes shortly.
  • Terms of payment always requires a wire transfer, no checks, no credit cards, only wire transfers. (Once a wire transfer is sent, there is no recourse, you can't get it back or get a refund).
  • You get invoiced with remittance bank account numbers to wire your money to.  
  • Photos are stolen from legitimate sellers or auctions. Often past sales and past auctions.
  • Inability for you or your rep to inspect the machine.  Try calling and arranging an inspection, they won't do it for dozens of reasons. 

These scammers award "winning bid" to literally everyone  who submits a bid. They send an invoice with remittance directions. Once you wire them money you even get a receipt. Then comes days of emails back and forth to set up the so called "shipment" of your equipment.  Of course that will fizzle out in a few days. By then your money is long gone offshore and you will not get it back or get anything for it.   

Just think of how lucrative this scam is.  Lets say a high end UTV all decked out shows on an auction closing tomorrow.   Nationally, they get 67 bidders all of whom get their "winning bidder invoices" and pay by wire transfer. Lets say average of $14,000 per bidder.  That's $938,000 on one fake auction UTV that no one will ever get.  Do this in 10 auctions in a week, do the math!!!

I've seen agricultural  combines sold this way for around $89,000 to $100,000,  How many winning bidders...no one knows.  But multiply that by 50 or 60 winning bidders.  Get the point?   

Don't fall for this stuff, it is created, dies out, then gets recreated every 30 days or so.   Don't become a victim.   

Posted

TYPO:

"...despite claims of 20 years in business the site was set up first week of November 2014."  It was set up November 2024  

Posted

@Alien10

These kind of crooks have been around since the street fairs and carnivals. I was involved in pinching one about 20 years ago. This scam sent out faxes with an invoice for something that pertained to the type of business. They had the Yellow books for the whole nation and operated out of 6 to 8 centers around the US. For instance. elec got wire or terminals. Ag equip got filters etc. You would have to work in an office environment to realize how many invoices get paid with just a payables clerk approval. ThaT  is why PO #'s and matching is so important. hey sent these out by the thousands and I would be willing to say 50% were paid. Many of these little clerks paid the bill because they were afraid not to if the big boss had ordered it and he got a phone call. Also a big part of using the fax machines was that it couldn't be prosecuted under Federal Law.If they mailed an invoice it was considered mail fraud and the Postal inspectors could track them to the end of the world. I had located one of their office spaces and a tip to the FBI got me a phone call for what I knew. Never found out the outcome but was glad to help.

Nothing I hate worst than a thief. Everyone needs to stay diligent on the web. If it looks too good to be true it probably is!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Paul Angstadt
      Hi everybody. I just bought a 2012 Hisun with the 700cc engine. Was wondering where i could find a service manual for this thing?
      Its going to need some parts that are missing, like the air intake hoses and other things. Also the dash display is out. the only light that works is neutral light. Not even sure on the model. from pics I've seen, it looks like an HS700. Kind of grey with the black stripes on the hood. Just hoping i can find parts for it.
      Thank you for any advice you can give me. By the way, it does run and goes forward and reverse.
      Paul
    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
×
×
  • Create New...