Quantcast
Jump to content


Recommended Posts

Posted

New to this. I am looking to pick up a used side by side for our property. It is a little over 18 acres, 15 of which are woods. I need something with a good hydraulic bed. It will be used primarily for chores and hauling wood on the property. I’ve looked at Polaris and Kubota (diesel). Reliability is key as is cost. Is the 570 large enough for hilly woods? Plan to spend around $6000 . Also, how many hours is too many?  Thanks 

Posted

I wouldn't be comfortable buying one with 700+ hours, mainly since I don't know how regularly maintenance was performed. It really does boil down to how well it was taken care of. If you Are looking at a used unit from an individual look at the color of the oil, don't want it to be dark/grey.

 

Posted

I will add I have seen older Kubota utility vehicles for sale and running great with 2000 hours +,  the Kubota will probably have more torque since most are diesel, so it could haul more, especially on hills.

I don't know a lot about Polaris, but I do know they have the most recalls per 100 vehicles than Kawasaki,Kubota, others.

Posted

I've used the Kubota for a few hours. It has some nice features, good power. I'd recommend it. The one that I used had a high, low, and mid range. My mule only has high, and low. If I had it to do over, I'd definitely choose the Kubota.

  • 3 weeks later...
Posted

My Scag mechanic has traded for a 2008 Kawasaki Teryx 700 with 525 hrs. He is going to tear it down and replace needed parts. He is very reliable and will not sell it until he thinks it’s right. He is expecting to sell it for about 3500 to 4000 when it is ready. Any thought would be appreciated. It has new tires. Thanks

Posted

If the reviews are favorable, I'd Google "2008 Teryx 750 problems"  followed by maintenance issues etc. That way you can see if some unforseen problem might possibly be lurking right there waiting. 

That doesn't mean that you'll have any problem, but it gives more knowledge. Most reviews are done on new machines, that haven't had time, or elements working against it yet. Really only covering performance, and capabilities. All good things to know, but if a maintenance nightmare awaits, I'd want to know that as well.

There should be plenty of information available about a 2008 machine. So you'll probably get all the information you need. And honestly, if it's in good shape, that's probably a fair deal. As I remember, the Teryx was a pricey machine, small, and fast. Geared more for fun, than work. Kind of a side×side version of a 4 wheeler. Either way, if it has a trailer hitch it'll be okay for light duty. And one thing I've learned on this forum, is that parts availability is a big plus. 

If you do buy it, be sure to get a shop service manual for it. Or for anything that you do get. Those manuals are pure gold, and together with the internet, can solve most problems.

  • Like 1
  • 3 weeks later...
Posted
On 9/3/2019 at 12:19 PM, KJ2654 said:

My Scag mechanic has traded for a 2008 Kawasaki Teryx 700 with 525 hrs. He is going to tear it down and replace needed parts. He is very reliable and will not sell it until he thinks it’s right. He is expecting to sell it for about 3500 to 4000 when it is ready. Any thought would be appreciated. It has new tires. Thanks

I’ve settled on the Teryx for 3500. Runs great, cosmetically fair. Appreciate the comments that ultimately helped me feel more confident in this purchase. Any more advice about the Teryx or off-roading in general would be appreciated. It will mainly be used for helping around the property and riding back in our woods. Experiences opened up trails would be really helpful. Thanks again 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
×
×
  • Create New...