Quantcast
Jump to content


Recommended Posts

Posted

I own a 2024 K9 with 43 hours on it. I haven't had any issues at all except for a loose hose clamp causing an antifreeze leak. Can you advise what type of issues you are having? My only consistent complaint is the loudness of the engine noise inside the cab.

Posted

I bought mine March 2024, since then it has had the following:

stuck throttle 

leaking windshield 

A/C failure 

broken CV joint

brakes that won’t compress well enough, won’t hold stop on a slope

emergency brake constantly needing to be adjusted and tightened 

roll up windows falling off tracks in the doors

plastic rivets pop loose and fall out

radiator leak

transmission won’t disengage out of gear 

transmission bearing replacement 

metal shavings in transmission and oil 

the dealer tells me I’m not the only one with some or all the same issues.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • By John Doe
      Hello,
      I have a T-Boss 410. When I shift to H it starts beeping like it’s in R. It also shows R on the instrument panel. Fixes?
    • By bms stallion owner
      hello, my BMS Stallion 600 is having accleration issues. the manual fails to show final gear oil diagrams very well... I have the owners manual and suspect issue is associated to transmission , I want to check the level of the gearoil. I located a drain plug (but not the fill plug nor dipstick). It will run - but wont exceede 2mph. Troubleshooting suggestions or comprehensive manual suggestions? Thanks
×
×
  • Create New...