Quantcast
Jump to content


Recommended Posts

Posted

Hi,

I'm in the market for a hunting/ ice fishing utv. I've been looking at the normal group (Ranger, pioneer, defender, general, wolverine, etc.) of used units and came across a 2014 Joyner R2. It's got a full cab, heater and a winch.  Supposedly no mechanical issues. They're asking $7K. I've never heard of the brand and have been doing some internet research. It sounds like the older units had issues but the newer units since 2014 are better. The utv is exactly what I'd like to have but I'm just looking for advice from folks who know more about these units. Thanks for the help.

  • Alex changed the title to 2014 Joyner R2
Posted

I've said this on other posts.  You'll find die-hard fans for any brand of UTV/SxS.  There is no perfect UTV.  Even brand name UTVs have issues with broken/overheated/burnedf belts, drive shafts, CV joints, engines, etc. especially when driven beyond their capability.  I bought a used Joyner (paid $7k 3 years ago) because 1) I pave my own roads, 2) I can't see spending $20k-$30k+ for a "pretty" UTV that I might ride a few times a year.  It's just not in my budget.  The early Joyners had quality control issues, but they've seem to have improved.  In other posts, the differenials seem to be a weak point.  But I believe that the failures might be related to driving them beyond their limitations.  I'll admit that UTVs with CVTs are easier to drive.  The Joyners with the clutch and 5-speed transmissions require you to take an active role in managing power to the drive axles.  The John Deere 825i uses the same Chery engine (800cc) as the early Renegades.  One model of the Kawasaki also uses a Chery engine.  If the UTV has a gasoline engine (3-cyl 800cc or 4-cyl 1100cc), it just might be a Chery engine.  Those owners probably don't know that they are driving Chinese "junk".  The larger displacement Chery engines are relatively common in cars sold in Asia, Africa and South America.  In 2014, the Renegade has the 1100cc engine - same as their Trooper.  The Joyner and Troopers are wide machines (60in); you may be limited to where you can ride on narrow trails.  I did a search for UTV recalls.  Most brand name UTVs & ATVs have had recalls.  I couldn't find any recalls for Joyner Troopers or Renegades.  Maybe they just don't issue recalls whether needed or not.  Support for these UTVs however, may be difficult to find.  Dealerships aren't as wide spread as name brand UTVs.  I haven't experienced any issues with my UTV - yet.  I use mine as a means of transportation in the backwoods, not as a race car to jump over cliffs. Personally, I like my Renegade.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?
    • By Greg Kilgore
      Last year bought a small universal coolant style cab heater. Well I installed it today. Thanks to another member, RangeRider45, and his install
       
      That told in his post the size fitting he used. I got the same fittings plus a few others. And all went kinda smooth. Took a few minutes to get air purged from coolant system. Should have parked on hill with front up in the air. But would have had a hard time working on it.
      I had a variable power switch connected to an overhead cab fan. Never really used the fan that much. And I have to remove the fan to put on my cab enclosure anyway. So I repurposed the switch to supply power for the heater. The heater has 2 12-volt DC computer fans that are rated for 1.8 amps each. So it's not going to be a big drain on the weak charging system. And with the switch I've got great control over the speed of the fans.
      If anyone is interested the radiator hoses are 7/8 inch. I reworked the temperature sending unit (moved it closer to radiator) to make room for all the extra plumbing I did to get the heater to work the way I wanted. 
      Plumbing parts list.
      10-15 worm water clamps. 3/4 to 1 1/4 inch size.
      2 1" x 3/4" x 1" PEX Tee
      1 3/4" PEX ball valve
      1 1" PEX ball valve
      5/8" heater hose. I got 6' and probably have 4' left over.
      I used the radiator house I cut out to use as splices between the PEX fittings. The PEX fittings are not true to their dimensions that are stated on the package. So they fit the 5/8" and 7/8" very nicely.
      They way I have it plumbed is from radiation out side. A tee, then the 1" ball valve, then a Tee. Coming off the Tees are the hoses going to the heater core. There is a 3/4" ball valve on one of the Tees. The ball valves are used to bypass the heater core in the summer. Or direct the hot coolant through the heater core in winter. The temperature sending unit tells me how hot the coolant is. And if anything is getting too hot. The dash also has an idiot light that comes on if the head gets too hot. But doesn't do anything if the radiator gets too hot. There is a temp sensor on the radiator that controls the electrical fan. But if the coolant isn't circulating. That switch never sends a signal to turn on the fan. But enough talking/rambling. Everyone wants to see pics. The only thing I need to change is the orientation of the handle on the 1" ball valve. I have 2" or more clearance between the handle and the tire when cut hard right. But I still don't like it. And instead of taking the valve out and rotating 180°. I'm just going to take the nut off and rotate the handle 180°. Think I need to make a locking mechanism to lock the handles in place so they don't vibrate closed when the machine is moving.
      The temperature sending unit and housing. Size 22 mm. Aluminum from Amazon.

      Upper Tee the lower Tee is identical. Can also see the handle of the 3/4" ball valve on the 5/8" hose going to the heater.

      The 1" ball valve. Goes between the 2 Tees

      Wide view of the plumbing.

      The heater installed in the sxs. The 3 black hoses are just hanging there. Zip ties to the heater but not attached to any thing. Will probably just direct 2 toward the wife's feet. And 1 toward mine. Or what ever is need as the heat is needed on rides. The black hose in passenger floorboard is some 1" hose that is not needed. Don't know what I'll do with it.

       
      I think if I was going to do it again. I'd put some Indian Head gasket dressing or silicone on the 1" side of the PEX fittings. And I may still do that. But I really hate the ideal of introducing air back in the coolant system.
       
      Any questions just ask. It may take a while to answer. But I'll try.
      Ya be good and stay warm over the next few months 
       
      Kilgore.
    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
×
×
  • Create New...