Quantcast
Jump to content


TIRES


Recommended Posts

Plumber, do you need some wheels for those tires, or maybe some extra wheels? I got another deal for someone, at present I have my old rear tire mounted on top for my spare. I like my new tires that are mounted on 14 X 6 in. wheels and would like a 5th one. If someone wants two (2) used rear tires on the 14 X 8 wheels with tubes, I'll trade for one General Grabber AT2 27x8.50 R14 95Q 6PR OWL tire mounted on a stock 14 X 6 in wheel.

2107057100104282158eChsEd_th.jpg

The tire in the center, one of the wheels had a rock lodge between the brake and the inside of the wheel. It caused a scratch all the way around and finally caused a shallow dent inwards as the rock shattered. This caused a leak and was repaired using JB Weld epoxy to seal the hole, both inside and out, it worked fine, the tube was put in later when the tire developed a leak in the side wall. Photos later.

Tire shipped to me $98.92

Wheel shipped to me $105.74

Mount tire locally $12.50

Total for (2) used rear tires on the 14 X 8 wheels with tubes $217.16 + shipping.

https://teamjoynerusa.3dcartstores.com/14-x...nt_p_9-117.html

https://teamjoynerusa.3dcartstores.com/14-x...ar_p_9-118.html

Link to comment
Share on other sites

Plumber, do you need some wheels for those tires, or maybe some extra wheels? I got another deal for someone, at present I have my old rear tire mounted on top for my spare. I like my new tires that are mounted on 14 X 6 in. wheels and would like a 5th one. If someone wants two (2) used rear tires on the 14 X 8 wheels with tubes, I'll trade for one General Grabber AT2 27x8.50 R14 95Q 6PR OWL tire mounted on a stock 14 X 6 in wheel.

2107057100104282158eChsEd_th.jpg

The tire in the center, one of the wheels had a rock lodge between the brake and the inside of the wheel. It caused a scratch all the way around and finally caused a shallow dent inwards as the rock shattered. This caused a leak and was repaired using JB Weld epoxy to seal the hole, both inside and out, it worked fine, the tube was put in later when the tire developed a leak in the side wall. Photos later.

Tire shipped to me $98.92

Wheel shipped to me $105.74

Mount tire locally $12.50

Total for (2) used rear tires on the 14 X 8 wheels with tubes $217.16 + shipping.

https://teamjoynerusa.3dcartstores.com/14-x...nt_p_9-117.html

https://teamjoynerusa.3dcartstores.com/14-x...ar_p_9-118.html

Kinarfi,

Let me try to get this straight what you are offering? 2used back tires, and 2 back rims 14*8. I understand about the wear and tear on the one rim.

Link to comment
Share on other sites

  • 4 weeks later...

Just a note to you guys that like the mud and water, the diff vent hoses are not very high, they could use a little more length, also the fuse box under the dash on the passanger side is not sealed on the firewall on my car. I sanded the back side of the box to get it to fit to keep the mud out of the back of it. There was also some one that sucked water in through the breather (crome canistar on drivers side) into the engine that cost them a rebuilt engine

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • By MISTERTIRE66
      Recently inherited 08 joyner renegade r4 800.. seems to be sound mechanically but I cannot find bal joints. Any pone help with other replacement part number please.
    • By Duncan
      I got a utv from lowes it has one tire in the back that is the same size as the front tires so it has 3, 26-9-14 and 1 26-11-24. i want to change the rear tire to the same one as the other.So instead of buying a new rim will a 26-11-24 tire fit on a 26-9-14 rim.
    • By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
    • Sell your car with CarBrain
    • By sxr951
      corrosion had its oring neck area  jammed in.. and besides that had corrosion in the starter just shorted when ran direct jumper cable to the starter post power to it

×
×
  • Create New...