Quantcast
Jump to content


2019 Coleman Utv 550 outfitter

Richard Armstrong

By Richard Armstrong
in Coleman UTV SxS Forum

 Share

Recommended Posts

Richard Armstrong Newbie

Richard Armstrong

Posted
  • Author
Posted

Lol I figured it out for some reason I was not getting power to the fuze box so I jumped it and everything turned on so I took some heavy duty wire and ran it from the power side of the key.       !/ the on position wire !/switch so know when I turn the key everything works ! Dont try this if u dont know what your doing cause u can cause damage just so u know ! Hope this helps some one ! 

  • Like 1
Link to comment
Share on other sites
  • 1 year later...
RDD Newbie

RDD

Posted
Posted

Have a 2019 Coleman Outfitter 550.    Just shut down while driving.   Finding that when pushing on the brake pedal it blows the F8 fuse so it will not start back up.   Tracked ALL wires and find nothing.   Will startup with a new fuse but hit the brake and its done?  Changed all the relays and still the same thing going on.   Anyone have any ideas.   Only have 30hrs on this unit.   Coleman has been NO HELP at all.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • tipoblanco
      Bighorn 550
      By tipoblanco
      Just purchased the  Bighorn 550 explorer,after the breakin period what engine oil and diff fluid are you using?ive read about using a motorcycle engine oil or just a 10w40 blend?and differentials,states a 80/90 gl5,is there something preferred over another?is there a better spark plug than the K6RTC? just want to start out doing it correctly,im a true believer in proper maintenance,thanks for any contribution
    • Jon V
      reassemble Cub Cadet Challenger 700 - Crankshaft does not turn freely
      By Jon V
      Good afternoon. When the timing chain came off its lower gear (previous owner had over-tightened the tensioner), I ordered new parts.. chain, oil-pump chain, tensioner etc.. But now that it's time to put it back together, the main crankshaft makes a clang noise and stops when you turn it by hand. I want to solve this before assembling everything. The camshaft cover is off so that the valves aren't being activated. Should the transmission be in neutral to turn the crankshaft? The engine was running fine until the chain came off the lower gear. Then it would spin when the starter motor engaged so I assumed the crankshaft was spinning. Any advice is appreciated.
    • Goat Quilter
      Coleman utv 400 loses power uphill
      By Goat Quilter
      We pout new belts cleaned engine and carburetor plugs you name it.  Drove down road no problem came back uphill no power won’t go . What’s the issue? 
       
      could it be clutch? 
       
      frustrated in shop more than in use on farm 
    • weasel
      Coleman 400 UTV fuel issue
      By weasel
      starts up you have keep rpms up for 5 minutes till it warms up then runs fine. But if it stalls wont start unless you unplug fuel pump and hold it to the floor till it starts then plug pump back in and run it till it warms up then it is fine all day.
    • Goat Quilter
      Coleman utv loses power uphill
      By Goat Quilter
      New belts and engine cleaned and checked carburetor cleaned drove on flat ground fine turned to go up hill lost power wouldn’t go 
      Could it be clutch issue?? 

      so frustrating this thing has been in shop more than used on our farm. 
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...