Quantcast
Jump to content


Recommended Posts

Posted

I recently purchased a coleman 550 outfitter and it was a no start so I got an awesome deal no miles got it home turn the key and there's no power I have checked wires grounds and selonoid /fuzes still nothing I'm hopeing some one can help me??? 

Posted

Lol I figured it out for some reason I was not getting power to the fuze box so I jumped it and everything turned on so I took some heavy duty wire and ran it from the power side of the key.       !/ the on position wire !/switch so know when I turn the key everything works ! Dont try this if u dont know what your doing cause u can cause damage just so u know ! Hope this helps some one ! 

  • Like 1
  • 1 year later...
Posted

Have a 2019 Coleman Outfitter 550.    Just shut down while driving.   Finding that when pushing on the brake pedal it blows the F8 fuse so it will not start back up.   Tracked ALL wires and find nothing.   Will startup with a new fuse but hit the brake and its done?  Changed all the relays and still the same thing going on.   Anyone have any ideas.   Only have 30hrs on this unit.   Coleman has been NO HELP at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By JDawg
      Was using the machine all day to haul wood...no issues until the end...
      When I try to start it, the dash lights come on but starter does not...seems like no power to the starter.
      It is in park, but when I put the brake on to start, it registers N.
      Won't start in neutral either...
      Tried rocking it, did not help...
      Help...
    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Frank in MI
      Found a NEW 2022 Bighorn 550 DX for $9K.   Any opinions on this machine????
       
    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
×
×
  • Create New...