Quantcast
Jump to content


Recommended Posts

Posted

Tried to buy a 2020 Kawasaki Mule Pro FXT and was told their was a stop sale on them, but the dealer had no info on what the problem was or how long until a solution is found to whatever the issue is.   Anyone know anything about this?

Posted

I'm also trying to find any info on the latest recall. Its not listed on the Kawasaki site. My parents purchased a 2019 Pro-FXT EPS on Dec 20, but it cannot be provided to them until the recall is complete. Kawasaki has not provided the fix details to the dealer yet.

Posted

Might read this to see if this affects any of yours

 

Fuel Leaks May Create Fire Hazard

In the recalled vehicles, two possible problems may exist:

  1. The engine oil cooler hoses can separate from the clamp joints due to insufficient clamp strength resulting in an oil leak.
  2. The fuel tank cap gasket can become pinched and torn when the cap is installed on the filler neck. This can result in a fuel and fuel vapor leak, creating a fire hazard.

The company has received seven reports so far of vehicles catching on fire or being damaged. Fortunately, no injuries have been reported.

The vehicles were sold from August 2018 through February 2019 for about $12,000 and were manufactured in Taiwan and imported by Kawasaki Motors Corporation.

The recall affects 2019 Mule Pro MX utility vehicles, models 700 EPS, 700 EPS LE, and 700 Camo EPS.

These are all four-wheel off-highway utility vehicles with side-by-side seating for two people and automotive-style controls. They came in camo, green, red, and white. Customers may see the “Mule Pro MX” logo printed on the right side and left front fender of the affected vehicles, and “Kawasaki” printed on the cargo box. The VIN should be located on the steel frame between the right, front lower A-arm mounts.

Kawasaki invites consumers to call toll-free at 866-802-9381 from 8:00 a.m. to 5:00 p.m. Monday through Friday for more information. They can also visit the company’s website.

Kawasaki Recalls 1,000 Mule Pros Over Rollover Risk

Other recalls have affected the Kawasaki Mule Pro. The most recent recall prior to the one detailed above involved about 1,000 vehicles. For this recall, there was a possibility that an incorrect grade of material — which did not meet the intended tensile strength—was used to manufacture the ROPS cross member of the rollover protective structure.

The recall involved 2018 model year Mule Pro DXT, DX and 2019 model year Mule Pro FXT, FX, and FXR utility vehicles. These were sold at Kawasaki dealers from August 31, 2018, to September 22, 2018, for between $13,100 and $17,000.

Consumers were advised to stop using the products immediately, and contact their dealerships to schedule a free repair, which would involve replacing the ROPS cross member.

Posted

I called Kawasaki customer service on Friday after posting above. The new recall (not posted on the Kawasaki site yet and not the ones listed above by Travis). CS stated that they are waiting on the Feds to approve their recall and then they will get it posted and rolled out. With Christmas and New Years, the feds have been slow to respond. It involves the breather tube and accumulation of dirt, debris, and water on the skid plate. They say they have the fix ready to roll out as soon as approved by the feds.

  • Like 1
  • 1 month later...
Posted

I found this,

Quote

 My understanding is that it has to do with moisture in the crankcase breather freezing in cold climates. When the freezing occurs it stops the crankcase depressurizing to atmosphere and it will cause the engine to belch oil out near the valve cover. Among other things, this is a fire hazard. Mine did this once on a frigid day here in missouri in January.
Supposedly affects 2015 - 2020 fxt pro models

.

  • Like 1
Posted

The Kawasaki sales rep still states that Kawasaki is just waiting on the Feds to approve their recall, but the one we purchased in December is still sitting at the dealership unable to be released. Supposedly Kawasaki is going to provide a cash rebate to the customer for ones that were purchased but unable to be delivered to the customer. That does nothing for the warranty months expiring since purchased though without possession, or interest or payments made for them sitting at the dealership.

  • Like 1
  • 2 weeks later...
Posted

I was told by dealer the stop sale is still in place.  Bought my 2020  Mule Pro FXT-EPS in early January.   called CS at kawasaki yesterday and they now have a $500 accessory credit available for this mule model until it's released...Think I'll buy a roof for mine and get that credit.  Also thought it would be mid March when it would be released...

  • Like 1
Posted

We bought a 2019 Pro FXT EPS 3 weeks ago and dealer still cannot release it and had no info on when delivery can take place.  We were offered the $500 rebate at the time.  I’m hoping this is resolved before end of March as I really would like delivery by then.  Fingers crossed.....

Posted
On 2/10/2020 at 6:42 PM, Volzalum said:

The Kawasaki sales rep still states that Kawasaki is just waiting on the Feds to approve their recall, but the one we purchased in December is still sitting at the dealership unable to be released. Supposedly Kawasaki is going to provide a cash rebate to the customer for ones that were purchased but unable to be delivered to the customer. That does nothing for the warranty months expiring since purchased though without possession, or interest or payments made for them sitting at the dealership.

Our dealer said they were unable to sell.  Warranty can not start while sale hold is active. They said.  We gave 500 to hold that particular one. 

Posted

Last week I took advantage of the $500 accessories rebate that Kawasaki is offering those of us that have a Mule Pro reserved in limbo. I had the dealer install the second set of LED headlights that does not come standard on my Mule Pro FXT EPS. I would advise anyone that is in the same situation to pick something out and take advantage of this offer since your Mule Pro is just sitting at the dealership.  After all, you get to spend their money! Lol!

  • Like 1
Posted

That is a very good point that I had not considered. I will contact my dealer tomorrow to ensure that is the way it is. Thank you for bringing that up! 

Posted
On 2/22/2020 at 7:09 AM, Larrygf said:

I was told by dealer the stop sale is still in place.  Bought my 2020  Mule Pro FXT-EPS in early January.   called CS at kawasaki yesterday and they now have a $500 accessory credit available for this mule model until it's released...Think I'll buy a roof for mine and get that credit.  Also thought it would be mid March when it would be released...

Is this $500 accessory credit in addition to the $500 rebate that was offered?  Or are you referring to the same offer?

Posted

Someone on another forum has stated there is now a second stop sale on the Mule Pro FXT concerning a steering issue. If true, that's news to me.  Has anyone here heard of this? 

Posted

Just spoke with my dealer who has absolutely no knowledge of the supposed "2nd stop sale". I'm going to take their word even though I can't imagine someone putting something on the internet that's not true. Lol!

Posted

I was offered the 500 off the sales price along with a 500 in accessories.  So mine is coming with a roof and a rear view mirror.  From what I've heard from Kawasaki it should only be a couple more weeks at the most and this should be done.   

Posted
8 hours ago, Jacob said:

I was offered the 500 off the sales price along with a 500 in accessories.  So mine is coming with a roof and a rear view mirror.  From what I've heard from Kawasaki it should only be a couple more weeks at the most and this should be done.   

If you don't mind my asking, who were you fortunate enough to get that information from? Anytime I have spoken to Kawasaki customer service all I have been told is "they haven't told us anything ."

  • Thanks 1
Posted

I talked to customer service about two weeks ago and she said that they didn’t have any projected time to resolve this issue but she would call me back if it hadn’t been resolved by the 17th of March (not sure about the importance of this date). I talked to my local dealer today and they say they haven’t received any information at all about this. 

Posted
12 hours ago, 2-8 said:

Just spoke with my dealer who has absolutely no knowledge of the supposed "2nd stop sale". I'm going to take their word even though I can't imagine someone putting something on the internet that's not true. Lol!

Here is 2nd stop sale

spacer.png

Posted

Spoke with customer service today who had absolutely no useful update or timeline and said they would call back at the end of March?.??!!  Only thing I was told was both stop sales are still in effect.  I had to tell a local dealer about the 2nd stop sale.  I am beginning to think I need to look for something else.  

Posted

Probably taking so long due to the fixes, I imagine they will need to come up with a fix for The problem, test it, make sure it works so they dont have to do this all over again then add it to all the thousands of models and vehicles affected.

But I'm sure it is very frustrating waiting, think after doing this for 30 years they'd have it down.

Hope you all get on the trail soon!

Posted
6 hours ago, Kmrider said:

Spoke with customer service today who had absolutely no useful update or timeline and said they would call back at the end of March?.??!!  Only thing I was told was both stop sales are still in effect.  I had to tell a local dealer about the 2nd stop sale.  I am beginning to think I need to look for something else.  

Something else yes.   However.   What kind of rebates and sales tactics will they offer once this gets better.  ?   My dealer is down 2800 from advertised price and also is giving me any further incentives that kawai may offer.   But yes im tired of waiting. Snow is gone here in iowa and we are ready to play

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...