Quantcast
Jump to content


Recommended Posts

Posted
10 hours ago, Daniel Tully said:

Just from an engineering / manufacturing point of view (I'm electrical, so grain of salt here) the cover should be a stamped piece, or maybe even molded - same difference, you make one and then you make 10000. the steering shaft, now that has to be cut, maybe turned, maybe threaded, Someone has to touch each one - that's the part that's going to be as rare as TP (sorry) - Since i got ya, I have put every incentive dollar into dressing my pro-fx out; adventure package and curtis plow. I am coming unglued waiting for it.

Daniel, I don’t have quite that much in mine yet but I’ve held off getting one for about 10 years and now I’m waiting more...it’s hard on me too. 

Posted

When I picked up my teryx from the dealer last week,  I had kind of talked the old man into looking at a mule pro fxt eps.  So,  we asked the salesman if he had any he could show us, and he did.   But like you have all said he told us here could sell it,  but we couldn't take it yet.   I think they had at least a couple there that were sold but still waiting on the recalls to be finalized before they could leave the place.   Shame, I think they probably could have made another sale that day otherwise. 

Posted

I was wondering if any of you have heard anything at all about the steering parts arriving anywhere.  My dealer has no idea on when they might arrive. 

Posted

I stopped at my Iowa dealer today.  They have 5 mules spoken for via deposit.  Sounds like they are hoping to  get 5 repair kits mid April.  Kawai called and asked how many they still had spoken for.  But as for the rest of the inventory who knows.  . Thats from sales staff.   Take with a grain of salt at this point.  I dont think anyone really knows.  Anyone will say anything positive about parts arrival to help avoid the loss of sale.   

Posted
13 minutes ago, Bruce40 said:

I stopped at my Iowa dealer today.  They have 5 mules spoken for via deposit.  Sounds like they are hoping to  get 5 repair kits mid April.  Kawai called and asked how many they still had spoken for.  But as for the rest of the inventory who knows.  . Thats from sales staff.   Take with a grain of salt at this point.  I dont think anyone really knows.  Anyone will say anything positive about parts arrival to help avoid the loss of sale.   

Let's make that a large grain of salt. Lol! I spoke with Kawasaki customer service today (April 30). They told me my dealer "should" receive parts in a couple of weeks.

Posted

I called kawasaki on monday and they told me nothing has shipped to any store yet.  These parts are made overseas and with the covid bs they have no idea when they will arrive.   But parts are ordered. Only problem is they will sit in customs for 10-14 days before they ship from there.  

Posted
1 hour ago, 2-8 said:

Let's make that a large grain of salt. Lol! I spoke with Kawasaki customer service today (April 30). They told me my dealer "should" receive parts in a couple of weeks.

 large grains.   Its anyones guess . Way to many variables

Posted
5 hours ago, Jacob said:

I called kawasaki on monday and they told me nothing has shipped to any store yet.  These parts are made overseas and with the covid bs they have no idea when they will arrive.   But parts are ordered. Only problem is they will sit in customs for 10-14 days before they ship from there.  

My dealer told me they already have the parts for the heat shield problem. Now they are waiting on the steering shaft parts and are supposed to be here by the end of the week. One part came from KY the other (the one they are still waiting on) was coming from California. It has shipped and they are tracking it. I better have my buggy by Saturday or I'm going to buy a Canam. This whole situation is driving me insane. Been waiting since the day they did the stop sale Dec 17th!!? Went to sign the papers and they were like OMG we can't sell it. The email came through right when we were fixing to sign the friggin papers gggrrrrrrrr!!!!! I need to be in the woods social distancing.... Lol

Posted

You’re part from Kentucky probably came off my machine....my dealer is closed during this Covid shutdown.....service department and all!! I’ve resorted to working on fences for the past 8 weeks. Got a nice new trailer tucked away in the barn ready to pull a Mule home too! 

Posted
3 hours ago, Jlantz493 said:

Kawasaki just told me it will be middle of may before we can pick up are mules

I don’t think I’ll be putting that in my calendar. Everything has been “in the next couple of weeks” since this mess started. I told my wife I’d be happy to have it by Thanksgiving and I was half joking but that could become the reality of things. 

Posted
11 minutes ago, West 5757 said:

I don’t think I’ll be putting that in my calendar. Everything has been “in the next couple of weeks” since this mess started. I told my wife I’d be happy to have it by Thanksgiving and I was half joking but that could become the reality of things. 

 

CB7C4CC7-5372-4E7F-8954-75C06969FB0C.jpeg

Posted

I talked to both my dealer and Kawasaki customer care today - both had similar status to relay - and similar to other posts.  The  parts to repair the fire hazard/exhaust manifold cover issue are already here (at the dealership).  The parts to address the steering shaft issue have yet to ship - with their current projection for receiving them as the end of this month (~April 30th).  So best case looks like early May for delivery of these units.  I guess that assumes the dealerships stay open (mine is for now).

Posted
4 hours ago, lakebob said:

I talked to both my dealer and Kawasaki customer care today - both had similar status to relay - and similar to other posts.  The  parts to repair the fire hazard/exhaust manifold cover issue are already here (at the dealership).  The parts to address the steering shaft issue have yet to ship - with their current projection for receiving them as the end of this month (~April 30th).  So best case looks like early May for delivery of these units.  I guess that assumes the dealerships stay open (mine is for now).

I could have made the exact same post with one exception.  My dealer has finally admitted they have no idea when the steering parts will arrive.

I feel that bit of information is the first and only piece of information I have been given that I can take to the bank.

Posted

I don’t know about you all but I think I would take my chances with the steering problem if they’d let me sign a waiver of some kind. I know a machinist that could turn out a few pieces a day if he had a good set of prints. 

Posted
2 hours ago, Jlantz493 said:

I wish they would let me take mine as well mine has 2 miles on it setting at the dealership paid for and all I could do is look at it lol

Do you go by and put your face to the window and mourn a few days a week? If mine wasn’t in the back I would have a bench set up. 

Posted

Any guesses on the percentage of people that received the letter from Kawasaki that said to "stop driving" that actually will, until parts show up?

Posted

I kind of let the Kawasaki rep off the hook when I said 'if its a safety issue then I know the answer if I offer to bring it back when the parts arrive' and he gave the answer i knew he would. He said the steering parts were originally being sourced from china, but then they started getting them made (I don't remember - far east country - sorry). He did say they were prioritizing the few that were slated to come in and they had talked to my dealer already. Said end of April - for whatever that's worth. 

Posted
2 hours ago, bartelso1975 said:

to me somebody at kawasaki has to know the status of these parts. i get it but somebody has to know

You are spot on with that statement. The biggest thing I don't understand is why everything about this situation is such a hidden secret.  If it weren't for the things I have done on my own (calling Kawasaki and joining this forum) I wouldn't know a single thing. Through all of this, neither my dealer or Kawasaki has reached out just to share any kind of update.

I agree completely. They know where those parts are and despite the virus, they know when they will arrive. 

Posted
52 minutes ago, 2-8 said:

You are spot on with that statement. The biggest thing I don't understand is why everything about this situation is such a hidden secret.  If it weren't for the things I have done on my own (calling Kawasaki and joining this forum) I wouldn't know a single thing. Through all of this, neither my dealer or Kawasaki has reached out just to share any kind of update.

I agree completely. They know where those parts are and despite the virus, they know when they will arrive. 

I’ll say this...if my dealer knows anything, he’s done a good job playing it off. I’d say there is someone inside Kawasaki that probably knows more than they are letting out but I wonder how many of us there are that are interested in this? Are there really that many people who are waiting in line to buy a Mule? From what I’ve read on here,the majority of us on this forum are ones who have bought one and waiting for it or have a deposit on one. Are there that many people in the same boat?

Posted

i have had mine paid for since jan 2. kawasaki is probably holding back date so they do not lose anymore sales. my dealer finally emailed me today with info i recieved off of furoms etc. 2 weeks ago

Posted
2 hours ago, West 5757 said:

I’ll say this...if my dealer knows anything, he’s done a good job playing it off. I’d say there is someone inside Kawasaki that probably knows more than they are letting out but I wonder how many of us there are that are interested in this? Are there really that many people who are waiting in line to buy a Mule? From what I’ve read on here,the majority of us on this forum are ones who have bought one and waiting for it or have a deposit on one. Are there that many people in the same boat?

I stopped at my dealer last tuesday. They informed me that their Kawasaki rep contacted them to verify how many they still had on hold via 500  $  deposit.  I assume this is to make sure just enough kits go to each dealer to get those units out the door.      But yes y such a secret?  Virus is not helping im sure at this point . But in Jan/Feb it was different reasons.   So your alls guess as to hush hush is as good as mine.   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
×
×
  • Create New...