Quantcast
Jump to content


Recommended Posts

Posted

Just bought my son and I a used 2018 Stampede....

Drove it for 2 days everything seemed great.  But then today, we had it sitting outside got back in to take off and it would only do like 5 mph with the gas to the floor ... WTH?  Have it in high gear... I'm far from a mechanic but have no clue.  Literally 30 minutes before hand we were doing 40mph.    

I did notice the engine light on but only had 2 bars ... he usually drives so I dont know if that is always on or not.  I looked at the owners manual and it stated that the bars and backlight flash when overheated ...

I have no clue.  Need help... son is worried he did something to it...

Please advise... thank u

 

Rob

Posted

Yes.  Seemed to be...  

The temp light was on but not blinking.  It would be great if there was a description or video of the console and what was "normal" on running conditions.  

It's about 40 degrees here.  Vehicle was running at 40 -50 mph 20 mins earlier.  Stopped for about 20-30 mins an engine temp light was on that I didnt see before and it would only go like 5 mph... on the book I have it states that if engine was over heated it would blink on console...  not sure.  

 

Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By dman66
      My buddy has a ut400 that the forward gear keeps popping out of gear. She only has like 400 miles on the odometer .the shift cable has been adjusted and the shift lever has been updated / modified. All other gears are good. Is there an internal detent cam or something that wears out or shift fork that can be replaced ? Or is there some other magic that I can perform ? Looks like the engine needs to be split.
    • By russnropes
      For the life of me I cannot find the directions on how to change the display to the standard for the USA - MPH. Not sure why Tractor Supply didn't do it before I bought it but it is what it is. Does anyone have the instructions to do this. I have the 2023 T Boss 550 just to be clear.
    • By Callie
      We have replaced the relay/fuse, water pump, fan & radiator cap. What are we missing? Fan still won't kick on.
×
×
  • Create New...