Quantcast
Jump to content


Recommended Posts

Posted

It seems like a perfect middle ground between the Kawasaki Mule Ranch Edition and the Polaris General 4 1000  .

But I can't find any reviews for this thing or who makes it's engine.

It looks great, seems like an awesome SxS, but would love some insight.  If you have any experience with this rig, please chime in.

Thanks

  • 1 month later...
Posted

I just purchased a 2020 Stampede 4 XT EPS about 30 days ago.  Like you I really couldn't find any reviews or information outside of the Arctic Cat website.  I think this is because Textron who bought Arctic Cat back in 2017 recently decided to bring the Arctic Cat name back to their UTV's after originally only using it on the snowmobiles post acquisition.  From the best I could tell this is the same 4 stroke engine that Textron had in the Recoil and Ambush models.   It's now being built in one of their MN facilities after moving production from Germany so it appears the whole machine is now built in MN.  I ended up purchasing the Stampede because I am familiar with the reliability of the Arctic Cat snowmobile brand from growing up in the north, the great standard features it comes with and the significant rebates that Artic Cat is currently giving.  I will say that down in Texas where I live they are extremely difficult to get.  I ended up having to go up to OK to pick one up.  I was told this was because this is a new model and the plant has been shut down due to the Pandemic.  

So far I really like the Stampede.  I only have about 20 hours on it but so far it's been a great vehicle.  Have mostly used it around our property to haul fencing equipment and other misc items.  I have taken it out in the mud a few times, once with a buddy who has a smaller Razor.  Obviously the Razor is more designed for off road so it was more nimble but overall it didn't blow my doors off by any stretch of the imagination and I was able to hang on it's tail almost all the time.   For me the real test will be in the long term durability of it because so far the initial performance and quality have been really good.  So far it's been well worth the long drive to pick it up and the money.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • By Reynolds Rocket
      I have a 2017 Intimidator XD4 800cc 4x4.  It will run great and then it's like it goes into safe mode and only runs on 1 cylinder.  It's not fouling out the plug when it happens.  Some times when I stop and restart it, it works fine.  First I thought it was a spark issue, then a fuel issue, but I feel like it's a short in the wiring some place. 
    • By lmarkie
      I swapped out the Subaru motor for a Predator 670cc. If I remove the heat shield around the muffler, The stock muffler sits in there just fine with 1" to spare.
      Only problem is the exhaust exit is toward the back seat instead of out the back.
      Do you all think that the stock exhaust would be okay (just as effective) if cut a hole and welded a pipe on the reversed (opposite) end? Of course, plug the old exit end. Other option I thought of was to roll a tube 180° with a 7" center line radius and finish extention of 12" or so.
      Any thoughts?
    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
×
×
  • Create New...