Quantcast
Jump to content


Recommended Posts

Posted

Hello everyone, I have a 2005 3010 Mule and would like to add an alternator, but of course it is no longer available. Will any of the later model 4010 alternators / brackets / belt fit?

 

Posted

Couple of recommendations. First, would be to try a starter/alternator rebuild shop. That's a common route for the guys who use the high power car stereos.  The alternator shop can put the high output parts in your alternator much cheaper than buying a new one. 

Next suggestion is to use the alternator from the diesel engine model.  They're a higher output than the gas models. 

Posted
16 minutes ago, Russ Knight said:

Thanks for the suggestions Ken. Problem is, finding the correct brackets, pulleys, and wiring harness.

Maybe I'm not understanding the problem. Are you suggesting that you'd need to add a second alternator?

Posted
6 minutes ago, kenfain said:

Maybe I'm not understanding the problem. Are you suggesting that you'd need to add a second alternator?

Kawasaki makes parts to where you can add a belt driven alternator, either in place of or replacing the stator behind the flywheel...

Posted
32 minutes ago, kenfain said:

Okay, I guess that I just assumed that all the 3010 gas models came equiped with an alternator.

I thought that too, at first, but I looked at the parts breakdowns and it shows the bigger alternator and mounting brackets in the "optional" parts list .

Posted

The alternator doesn't replace the stator because the stator also provides the timed ignition voltage to the coil, which then fires the spark plugs (it has two sets of windings). The stock stator, according to my information, provides about 15 amps of electrical power for lighting and accessories. The optional alternator can provide up to 50 more amps. Finding the kit is like finding hens teeth though. 🤣

  • 1 month later...
Posted

Have you thought about running a small generator instead. Because there's no way that you can pull that many amps without the engine running anyway. So why not a small generator? They're fairly quiet, and would be multi purpose too. Similar price, easier installation. 

  • Like 1
  • 3 weeks later...
Posted

Get yourself a 2000 watt inverter generaor (for quietest operation) and 100+ amp 12vdc power supply.  Bolt the generator to the back.  Then go for a ride.  Alternators for UTVs and ATVs are barely large enough to run the lights, computer, fuel pump and ignition system (about 400 watts).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
×
×
  • Create New...