Quantcast
Jump to content


2016 Sand viper 1100 front suspension rattle

TmJoyner

By TmJoyner
in Joyner UTV SxS Forum

 Share

Recommended Posts

TmJoyner Newbie

TmJoyner

Posted
Posted

New to the Joyner community.  Bought a used 2016 1100 sand viper in descent shape. Only 155 miles.   Runs great.  It just rattles quite a bit in the front when riding on rough gravel / hard-packed dirt roads outside St Johns.  Removed front wheels and seems to be coming from both upper and lower suspension arm bushings/radial bearings (see pic); both left and right.  Seems like some play inside the eyelets - as I shake the arms a bit.  I assume it's not supposed be loose in there like that and the bushing/bearings are worn.  Anyone have had this issue and how did you go about changing them?

 

IMG_1456.JPG

Link to comment
Share on other sites
TmJoyner Newbie

TmJoyner

Posted
  • Author
Posted

Also looking at some mods soon.  Thinking power steering first but can't see springing $1200 for ones at Joyner USA  + installation.  Already upgraded seat belts, tires and made my own windshield.

1.  Power Steering. Alright on straight runs but on tight trails, not easy

2.  Shocks...shocks...shocks.  Still has stock. Need suggestions on what is available to replace with.  Something with a little more travel.

2.  Some way to make shifting easier. The cable is too far down the clutch action arm.

3.  New rims.  The stock ones loose air, albeit slowly, faster then the spare I got from Powersport Superstore.

4. Turbo kit.  I have the stock 1100 cherry engine

5.  Cup holders!!  Haha.  Funny but, for real man, where do I put my drink at?

Link to comment
Share on other sites
  • 2 years later...
Kyle Cole Newbie

Kyle Cole

Posted
Posted

I just bought a 2016 Sand viper 1100 and I am having thr same issue with the rattle. I see you posted this a few years ago. How did you fix it? Mine only has 260 miles on it. It's only coming from the front right bottom A arm joint.

Please get back to me. If you could call that would be even better.  406-239-5446 my name is Kyle

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Greg Kilgore
      New AXIS 550
      By Greg Kilgore
      Was at Lowe's over the weekend. The wife and I seen they have a new Axis 550. That thing is sharp. Has a complete door. Speakers in door. Bigger engine. Bench seats. New styling all the way around. Looks to be more air tight than my 2022 model. I really like the looks but $10k is out of my price range for now. Unless I could sell mine. And the resale on the Axis 500 is nothing.
      Went to the local wally world today. See a 4 person Polaris General 1000 on the back of a trailer. That Polaris looked exactly like a stretched version of the Axis 550. Even down to the vents in the windshield.
      Just wondering if anyone can confirm or deny the Axis 550 is a copy of the Polaris?
    • Sisco
      2016 cub cadet challenger efi fuel pump
      By Sisco
      Does any have a part number for the fuel pump sock for a 2016 challenger 700 efi. Does not show on any parts diagram but the old pump has one on it.
    • diamondjfarm
      Good mornin' all. Just joined.
      By diamondjfarm
      I got an old 2003 Arctic Cat 375 Auto, and just bought a 2008 AC 650 side by side. Got a new starter, solenoid, and battery for the 650. Gonna change the crankcase oil and filter while I'm at it.
      Anything I oughta watch out for from them that's done the starter/solenoid on this model?
      Don't have a manual yet for the 650. Any recommendations for oil weight/grade?
      Thanks.
    • hdtran
      Do you wear a helmet when riding your side-by-side UTV?
      By hdtran
      That's the question! Or, if you want to add details:
      (a) How do you use the UTV? (roads? off-road to get to trees? etc.)
      (b) If you are wearing a helmet--how frequently? What type of helmet?
       
      My own answers: (a) Most of the time off-road to get to downed trees, cut the trees to logs and haul the logs back for splitting. (b) Very rarely, a ski helmet and not a motorcycle helmet.
    • Alien10
      DIY front implement mount for Coleman Outfitter 550????
      By Alien10
      A while back I was looking at an auction UTV plow and the mounting of it.  Looked like it had an "H" bar with two pins that hooked into brackets on the front frame of the UTV.   I have a bunch of 1/4" x2" angle iron, and some 2"x1/2" flat stock in the barn.   I was thinking of welding up a bolt on implement mount that would provide 2 holes about 14" apart, that pins could be used to hook up an "H" frame for a plow or even a straight bar across with pins to hold it in place.   The angle iron "A" would utilize the existing bumper mounting bolts front and bottom, and have the two channels "B" with holes for individual pins or one large bar across. Those channels would be welded to the ends of the angle iron. 
      Anyone ever try this for a front mount?   It would be close to  this one that is for sale on the net.  It is supposed to fit a KFI plow mount.  

       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...