Quantcast
Jump to content


Recommended Posts

Posted

2008Baja1000-Prowler-5-752159.jpg Arctic Cat Prowler 1000 XTZ

2008Baja1000-Prowler-1-714287.jpg Arctic Cat Prowler 700 XTX

Arctic Cat Prowlers Sweep Baja 1000

Minneapolis, Minn. – The finish line at the 41st Annual SCORE Baja 1000 was as dramatic as it was historic. Racing a pair of stock Arctic Cat Prowlers, the Bi-Polar/Arctic Cat team beat the brutal conditions to finish first and second place in the world’s longest, continuous off-road race. It was the first time in race history a side-by-side UTV vehicle has finished what is widely regarded as the most grueling off-road race in the world.

“We were the first-time finishers and first-time winners in this greatest of all races because of a total team effort,” said Bi-Polar team co-owner and driver Jim Creagan of Yacott, Wash. “From start-to-finish, every person fulfilled their role perfectly and each Prowler performed magnificently.”

Finishing first in the 634-mile race with a time of 27 hours and 57 minutes was a stock 2009 Prowler XTZ 1000 driven by Creagan and co-pilot Tim Wagner for the first 409 miles, followed by driver/co-driver Chris Fallon and Aaron Bahner for the remainder of the course.

Taking second place at 28 hours and 13 minutes was a 2009 Prowler XTX 700 EFI driven by three driver/co-driver combinations: Shane Morgan and Tabor Cresap, Scott Sorenson and Justin Serface, and Casey Squires and Mike Connors.

It was just the second attempt at the Baja 1000 for the Bi-Polar/Arctic Cat team. In 2007 they made it to mile-810 before succumbing to a broken suspension bolt. They returned this year, ready to prove the Prowler’s durability and to support their sponsors: Arctic Cat, Wired Energy Drink, Vision X Lighting, GBC Motorsports, TrailReady Beadlock Rims and King Shocks.

“These were stock Prowlers except for the required roll-cage, extra night lights, King shocks and tires,” said Creagan. “Nothing broke on either machine during the race and we had only one flat tire on the 700. Our support crew never even had to put a tool to either machine. It was just gas-and-go at the pit stops, which is a testament to their durability and performance. ”

View the full article

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

    • By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
    • By Hutch
      Okay everyone, need some help here. I got my 2014 Bennche Bighorn 700 from my father inlaw. He has had it since new and as far as I know never had any problems with it until recently. It began with it being hard to start and having to give it some throttle for it to start up. Then it wouldn't stay running once it did start. If you go to start it, it will fire right off and only run for a split second and then die. If you give it some throttle it will start and stay running as long as your foot is on the pedal. While it's running its pretty rough and backfires. Here is a list of everything I've done so far. Initially I checked compression and it was low. I changed the cylinder, piston and rings. Took the head apart cleaned and laped the valves. Checked timing a few times. Adjusted the valves. New spark plug. Checked the air filter, it was fine. New battery. Changed the fuel pump because of a broken fitting. Changed the fuel filter, lines and fuel injector. Dumped the old fuel and put new in. Changed the air idle control, TPS, MAP sensor, Voltage Regulator, ECU and harness. I was getting codes 31, 107, 113 and 122 on the display. Once I changed the ECU no more codes have been displayed but still have the same issues. All fuses look good and as far as I can tell Grounds are good unless there are some I can't find. I'm at a loss here. Not really sure where to go. Compression was better after everything I did but I don't remember the numbers. I'll have to check it again if someone thinks that could be the issue. Any help would be greatly appreciated!
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
×
×
  • Create New...