Quantcast
Jump to content


Back in time  

6 members have voted

  1. 1. Would you choose another UTV/SxS manufacturer if you could go back and do it again?

    • Yes! in a heartbeat
    • No way!
    • I wouldn't buy a different brand, just another model that was out also.

This poll is closed to new votes

  • Please sign in or register to vote in this poll.
  • Poll closed on 08/24/2020 at 01:49 AM

Recommended Posts

Posted

Some of us have had our Side by Sides for a long time and some of us for only a few years or months.... They say hindsight is 20/20 and in that case if you could go back and purchase a different UTV brand that would be better, would you?

after you've answered, comment below on why you may or may not choose differently

 

 

Posted

I would've preferred to have the kubota diesel. Much better design. Although I have no idea how durable it is. Or what kind of product support is offered by the manufacturer.

I drove one for a few days at work. It has a much better layout of the controls, power steering, three forward speeds, instead of two. Tractor style stomp pedal for locking the rear differential. And the gas guage is on the dashboard. 

Posted

I had weak moments I'd say..  where I considered if I should have gone a different route.. And thought of acting on it a few times too..  But instead of trading I changed the Trooper to better it in the areas where it was lacking! And what my Trooper has become today is something hard to beat.. It turns heads and is a animal on trails and hill climbs! 

Upgrades:

· Custom Electric power steering w/ 2:1 steering quicker

· Hand crafted aluminum intake w/22mm larger throttle body

· Port & polished

· Hand built Intercooled supercharger kit

· Haltech elite 1500 ECU w/ wideband controller & custom tune

· Haltech smart coils & Audi 1.8T injectors

· Lowered diffs w/ skid plates

· Fox air shocks all around

· 30" Sun-f power tires on Sedona beadlocks

·  LED headlights, lightbar, clearance lights and rock lights.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By rdborra
      I had to remove the relay for the dump bed due to it popping the fuse for main key power. I have tried to find a short but nothing seems to out of normal. I also disconnected the dump motor and switch and still pops the fuse. Also, when the machine is warmed up i get about 5 to 10 of work out of before it stalls. Once I can get it to start again I have to use the choke to keep it running. 
    • By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
×
×
  • Create New...