Quantcast
Jump to content


Recommended Posts

Posted

Installed a radio/media player in my new Hisun Sector E1. Got a universal under dash kit from Amazon for $13, a radio/media player from Walmart for $17, and two speaker kits with grills from a friend for $10. Had some wire, connectors, and screws lying around. Mounted the radio in the plastic under dash kit. The radio is amazing for the price. It is only about two inches deep, but has Bluetooth, USB, and AM/FM radio. Mounted the speakers in the panel under the seat. Ran the wiring through the drive shaft tunnel. Installed a in-line fuse for the + wire and tapped in to the head lamp switch for the ign on wire. Tapped in to a ground wire in the wire loom behind the switches. I use this to play my tunes from a flash drive. I did not even bother to connect an antenna to it. Because the E1 is electric there is no engine noise to drown out the music!

 

E1 Radio.jpg

  • Like 1
Posted

Nice! If I add anything else to my electrical system. I'll have to use a power distribution box. Mine came with a positive battery terminal, that had an add on lug on it. 

Unfortunately, I've taken the lazy advantage of using it to power several things. Electrically speaking, it's not a concern. But it's very ugly.

Posted

I have a 15 amp plug-in inline fuse at the battery plus terminal and a 14 gauge wire running to the front behind the dash. I use that to power the radio and an LED light strip that is in shipment presently. I will mount the switch for the LED lights in the knock on the dash behind the steering wheel. I am mounting the 12" light bar on the front bumper, just in front of the grill. Are you aware there is an empty 12v. connection in the rear under the tailgate? It is powered when the lights are on. In the wiring diagram it shows to be  for a license plate lamp. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By Justine
      I've had a Hisun Vector E1 for just a bit longer than is required for me to do some maintenance. While it's well-overdue, it only drives 1.5km a few times each week on a fairly decent gravel road (to the letterbox), and it has worked really well right from the get-go.
      Looking at the manual it states that I need to use SAE80 API GL-4 Hypoid Gear Oil for the Main gear Case, and SAE80 API GL-5 Hypoid Gear Oil for the Front gear Case - unfortunately i can't find either of those online here in Australia. Plenty of options that look close, but, as someone who has never driven any vehicle before, I want to use the right thing and it's a tad confusing.
      My question: Since there are no oils that are bang on SAE80 (they all seem to cover a range) would Liqui Moly Hypoid GL4 Gear Oil 80W-90  & Motorex Hypoid GL-5 Gear Oil 80W90 - be ok to use? (Or any other suggestions of what I might be able to purchase online in Australia) And would I have to drain out any existing oil from both gear cases?
      This is a whole new world for me and  being able to find exactly what is specified in the manual hasn't made this easy!
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
×
×
  • Create New...