Quantcast
Jump to content


Recommended Posts

Posted

Hi everyone, this is my first forum.

I purchased 2 Coleman 250 UTV for around the house.

It's perfect for running back and forth to the barn.

I have 3hrs on both machines and the units are sputtering. I used 94 Octane gas. I'm hoping someone might have an idea. 

 

Posted

Could be water in the fuel, either empty some gas from the unit into a clear container, or the can you fill them up with, and let it sit for about 10 minutes, see if there is any sepration  as the water and ethanol will form a line between the gasoline.

Posted

It might be helpful to tell you the whole story.

When I purchased it 3 days ago.

I had a bunch of issues.

Gas pouring through the vent hose.

Missing parts, broken springs on the brake pedal. Brake cable slipping. I can with all honesty say quality control is not a priority.

 

Posted

gas pouring out the vent hose,,,, sounds like the float/ float needle isn't metering the fuel flow to the carburetor...

i read that most Coleman's have a 2 year warranty, sounds to me like you need to save some headache, file a warranty claim, for the running issues, and the crap QC.

Or contact Coleman (which i think is manufactured by HiSun motors) and ask them if they've ever heard of the Lemon Law.

Posted

Don't believe everything you read.

I said shipped fully assembled.

I assembled it. That's why I'm missing parts. The engine came fully intact. The roof, seats and tipping box in boxes.

I looked at the one in the store I bought it from. There missing parts too.

I will proceed to make a claim in the morning.

Thanks a bunch.

  • 3 weeks later...
Posted

Hi guys, 

Just an update. 

I returned both Coleman UTV 250.

After preparing a list of 38 issues on both UTV's.

Distributor agreed to take them back, and exchange for 2 Coleman 400 cc.

I might be asking for trouble or trouble just fines me.

Thanks for your support. 

This forum is awesome. Keep up the good work.  5 stars for us newbies.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.
    • By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
×
×
  • Create New...