Quantcast
Jump to content


Recommended Posts

Posted

Welcome to the UTV Board!

I know an engine may burn a little oil while the piston rings are still being broke in, usually a break in period lasts 20 hours, ( but rings usually seat pretty quick) , keep an eye on the oil level just in a case there is a leak.

Do you ever see smoke, or just smell burnt oil?

  • 4 months later...
Posted

Have had my Tracker 800 SX since June 2020 and really enjoy the ease of entry and exit.  Just discovered a major issue that everyone should know about.  I purchased my machine at Bass Pro in Nashville, TN and had my break in service done at the Nashville Service center.  Used the UTV for hunting last fall and then put it away for winter.  Got it out today to play in the snow and found that the cooling system was frozen.  (that Polar Vortex in Feb of 2021, brought us 8 degree temperatures here in western Kentucky.)  Called Nashville service and they report they do not put any anti-freeze in the system when they do a service , just check the water level.  I cannot believe anyone sells a water cooled machine without insuring antifreeze protection in a new machine.  So here is the bottom line.  If you buy a new,$13,000 Tracker 800 SX do not assume it has antifreeze in it.  I appears you must take the new machine home, drain the radiator and then put in your own antifreeze.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Marie
      hello, i need help figuring out where all these wires go on this battery. I can't seem to find any pictures diagrams. As to what should or shouldn't be attached and where these two plugs go, that aren't plugged in. this was got as a project. would run then die and battery would have to be jumped off to start again stator has now been replaced but any help with this wiring would be appreciated. 
    • By Marie
      Hello, we recently got a 2013 Hisun 800 as a little project for my husband and I to work on. Turns out the guys before us loved the mud anyway. We have replaced the stator and now going to do the Rectifier but here is the hold up as seen in the picture. There are tons of wires going to the battery. I cant seem to find anything that shows what wires should, or shouldn't be attached to the battery or where these 2 plugs go. if someone would please take some pics or share knowledge to where they go I would appreciate it greatly.
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By SteveS
      While driving the MSU 800, it runs good but it lately it will not go over 20 MPH. The side by side will hesitate when it reaches 21 MPH, but it will run good under 20 MPH. What is the issue?
    • By Gary Odom
      Noticed the radiator reservoir has a pin hole leak at the seam. unit has less than 600 miles. Anyone else have this issue.
×
×
  • Create New...