Quantcast
Jump to content


Recommended Posts

Posted

Hi all.  I just found this forum and am so happy to find a source of information about the CC side by sides as the information on the web can be limited.  Our 2018 has squeaks while moving slowly.  Seems to come mainly from the front wheel area, but it intermittent and is very annoying.  Any thoughts or experience someone can share?

Also, like everyone else with the roof, doors, front and rear windows and occasional the top half of the doors, it can get pretty loud inside while riding.  I read someone mentioned using a yoga mat under the seat (gonna do that this weekend).  Other modifications being done to reduce noise levels in the cab?  Thought about sound deadening material (seen that mentioned here as well and know that friend's Mule has insulation under seat and on the outside of the front panel of the seat.

Thanks!

Posted

I have the same squeak.  My guess is the brakes.  I might check it out this week.
The cab noise is pretty loud.  Since I'm no longer under warranty I think I'm going to reroute the clutch vent, which vents below the drivers seat, to the back of the vehicle.  I think a lot of the noise comes from that

Posted

Richard - would be interested in what you find on the brakes.  Could you please post once you have checked them out.   Thanks for the feedback on the cab noise as well.  I assume the whole purpose of the clutch vent it to remove heat from that area and nothing else.  Would like to see how you do this.  Another user here VERNO shared that he did the same thing and it reduced the cab noise somewhat.  Also installing a yoga mat underneath the seat.  I also thought of sound deadening material on the outside of the compartment that sits below the seat as this is very open and I have seen other SxS that have noise deadening material here such as the Kawasaki Mule.

Thanks!

  • 4 weeks later...
Posted

Happy to report we put a yoga mat in between the seat and the top of the engine compartment just like recommended here and what a difference that made.  I could not believe it!  Thinking sound deadening material on the inside of the engine compartment (outside of the wall that is under the seat at your feet inside the cab) and heavy floor mats might help as well.  Thanks to Richard and VERNO!

@Richard Hughes - any update on the brake squeaking?  Was riding with a friend that has a Mule and his was doing it also.  He said - it comes and goes, sometimes it does it and some times it doesn't but more often than not just after cleaning.

Posted
4 hours ago, Mikey1971 said:

@Terry Hering which muffler did you purchase?  If you have not tried the yoga mat underneath the seat, well worth it.  What other things have you found out?  BTW - welcome to the board!I'm still under warranty so they put Muffler number 759 - 0 5 5 8 3 on it. Price is $962.95. Not Counting all the other parts that they needed for the muffler. The template is $15.95, ignition cable which was $49.95. Then I asked him do a once-over the make sure everything's okay before the warranty goes out. And I like a oil change, now that I got it back it sounds like the wet clutch is going. And I did not try to yoga mats yet but I pick some up today. It's not that much quieter with a new muffler on.

Posted

@Terry Hering OUCH!  That sounds very expensive.  We were thinking of something aftermarket that might quite things down a bit.  We have also been looking into DYNAMAT or something similar to add in certain areas where the noise seems to be resonating from.  Also heavy floor mats should dampen the noise even more.  I have also been looking at the clutch venting notes from VERNO above.  Thinking this might help as well.  I truly appreciate the insight about your ordeal.  I know there are a few of us out there that are working these items that Cub Cadet did not do well on and sharing will help us all be more satisfied with our purchase.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
    • By KimAC
      I need a pair of front shocks for a Landpride Treker 4200NT, from 2005?  Does anyone know of a good salvage yard - or another source?
      The old shocks have "SEBAC 11685 12 3" stamped on them (or something very close - it's hard to read). I think SEBAC are (were?) an Italian company.
      Is there a compatible shock I can use? I don't have easy access to a scrap yard where I can compare shocks etc.
      Thanks,
      -Kim
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By dman66
      My buddy has a ut400 that the forward gear keeps popping out of gear. She only has like 400 miles on the odometer .the shift cable has been adjusted and the shift lever has been updated / modified. All other gears are good. Is there an internal detent cam or something that wears out or shift fork that can be replaced ? Or is there some other magic that I can perform ? Looks like the engine needs to be split.
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
×
×
  • Create New...