Quantcast
Jump to content


2019 Massimo MSU 400 Burn rubber smell

Liv4upoutdoors

By Liv4upoutdoors
in Massimo UTV SxS Forum

 Share

Recommended Posts

Liv4upoutdoors Apprentice

Liv4upoutdoors

Posted
Posted

I just bought a 2019  MSU 400 w/ 700 miles.  I got it home yesterday and noticed a faint rubber burning smell.  I can't track it down.  I'm on dirt so its not tires and pavement.  Parking brake is off.  Temp on the machine appears fine.  Thx for any suggestions   I thought maybe belt but I'm not racing nor going but a mile or two.   

  • Alex changed the title to 2019 Massimo MSU 400 Burn rubber smell
Travis Grand Master

Travis

Posted
Posted

i would start it up, or turn the key ON, and feel of any hot wires you can reach, such as the main + battery cable, to be sure there isn't a short burning the coating off a wire.

also check for any thing that may have fell on the muffler/exhaust pipe.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Homeowner A
      Coleman UT 400 Garage?
      By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • Will Sutton
      Coleman UT400 won't rev. Idles fine
      By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
    • shawn b
      2020 hisun 400 utv side by side
      By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
    • MMaster
      temp gauge
      By MMaster
      does anyone know of a replacement temp gauge that will work on a joyner 2016 r4, my gauge has condensation in it and it quit working
    • MMaster
      temp gauge
      By MMaster
      looking for a replacement  temp gauge that will work with my joyner r4 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...