Quantcast
Jump to content


new member from Arkansas

g benjamin

By g benjamin
in New Members Area

 Share

Recommended Posts

g benjamin Rookie

g benjamin

Posted
Posted

Nedw to the board  live in the mountains of northwest Arkansas and have bought a 2004 Kawasaki Mule 3010 diesel KAF950B2. Really like it, haven't found all its problems as yet . Previous owner changed wiring  and I am slowly rewiring back to original.  I am about to remove and test glow plugs and in looking for replacement glow plugs I find the price too expensive.    MY QUESTION: does anyone know of a glow plug that will fit that is also under $20 a piece?  Please let me know.  you may contact me direct if you choose, [email protected]

 

Travis Grand Master

Travis

Posted
Posted

These NGK glow plugs kept coming up in my search, NGK Glow Plug Y-706R  , might contact NGK with that part number and Kawasaki's part number and see if they will work. The prices were anywhere from $17 to $30 depending where you look.

kenfain Experienced

kenfain

Posted
Posted

Welcome to the forum!

I've got a 2005 3010 diesel. And I have to tell you, it seems to be a rare bird. While I can't answer your question, nor do I have much experience with working on diesels. Mine was purchased new, and has seen exactly zero problems. 

However I can offer anything  from any page of my shop service manual. It's a factory shop service manual, and is extremely detailed. Although certain details, like part numbers are somewhat lacking. 

You are welcome to any information that I have. 

Travis Grand Master

Travis

Posted
Posted

Also if you can supply what engine make your Mule has, i don't think Kawasaki made their own diesel for the mule it's either Yanmar or Daihatsu. 

Sometimes going by engine maker makes parts easier to find.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Marie
      Wiring 2013 Hisun 800
      By Marie
      hello, i need help figuring out where all these wires go on this battery. I can't seem to find any pictures diagrams. As to what should or shouldn't be attached and where these two plugs go, that aren't plugged in. this was got as a project. would run then die and battery would have to be jumped off to start again stator has now been replaced but any help with this wiring would be appreciated. 
    • Marie
      2013 Hisun 800 Please Help Wiring
      By Marie
      Hello, we recently got a 2013 Hisun 800 as a little project for my husband and I to work on. Turns out the guys before us loved the mud anyway. We have replaced the stator and now going to do the Rectifier but here is the hold up as seen in the picture. There are tons of wires going to the battery. I cant seem to find anything that shows what wires should, or shouldn't be attached to the battery or where these 2 plugs go. if someone would please take some pics or share knowledge to where they go I would appreciate it greatly.
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Matthew Smith
      SXS No Crank at the Key and No Spark
      By Matthew Smith
      2013 Bennche Bighorn 700 EFI
       I just picked up this project that I was told would crank, but not start.  This is what I’ve figured out so far….
      I installed a new battery and get all dash lights, head lights, and brake lights on when turning the ignition on.  Fuel pump even turns on.  It does not crank with the key, but would when I jumped the starter solenoid, so I replaced it…..no change.
      Figured I’d check for spark and compression while I was dorking around.  Compression is 150 psi, but there is no spark.  Replaced the spark plug… no change.
      So, is my new starter solenoid bad?  Could it be the brake or gear position switches even though the brakes and neutral lights come on?  Not sure where to go from here.




    • rsar
      Washing Mule Underbody
      By rsar
      Hey guys. I was wondering if anyone pressure washes their Mule underbody. Three years in, I have yet to do this. I'm worried that the pressure washer could damage or dislodge something but it's gotten to the point that it could use a bath. Any thoughts?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...