Quantcast
Jump to content


Recommended Posts

Posted
2017 Polaris RZR XP Turbo
2017 Polaris RZR XP4 Turbo
Minneapolis, Sept. 16, 2016 – Today, Polaris RZRsets another new standard in razor-sharp performance with the introduction of the RZR XP Turbo EPS and RZR XP 4 Turbo EPS. Featuring a new ProStar® Turbo H.O. engine that unleashes 168 horsepower – the most power ever offered on a factory side-by-side – the vehicles offer 15 percent more power than last year’s models and 9 percent more than anything else on the market.

2017 Polaris RZR XP Turbo
2017 Polaris RZR XP Turbo Intake
  To match the horsepower upgrade  and significantly improve on 2016 models – the 2017 RZR XP Turbo models feature new, high-capacity cooling, and a stronger driveline to get that power to the ground. The high-capacity cooling includes a new, more powerful, variable-speed, brushless fan coupled with a new, 40-percent larger, high-flow front grill and a 20-percent larger engine radiator. The new cooling ensures the engine can breathe for maximum power delivery.

2017 Polaris RZR XP Turbo
2017 Polaris RZR XP Turbo Grill

The RZR XP Turbo EPS and RZR XP 4 Turbo EPS boast the most premium suspension, with exclusive FOX Podium® Internal Bypass Shocks that deliver the plushest ride and best handling found on a side-by-side. The shocks generate progressive damping force that gives the vehicles a smooth ride with all the bottom-out resistance expected from ultra-performance off-road vehicles. Large-diameter shock bodies (3-in/7.6 cm rear, 2.5-in./6.4-cm front), adjustable remote reservoirs and increased fluid capacity provide dramatic improvements in heat dissipation, fade resistance and durability. By using five compression zones to provide progressive damping as the shock gently absorbs bumps and stiffens to prevent bottoming, the Internal Bypass Shocks feel like five shocks in one. Combine that with three zones of rebound damping to minimize pitching, plus harsh top out for an ultra-plush ride and better handling over a wider range of terrain at any speed.

2017 Polaris RZR XP Turbo
2017 Polaris RZR XP Turbo Quick Steering Ratio
 For ultimate agility, the vehicles feature front and re-tuned rear stabilizer bars to virtually eliminate body roll for flatter cornering. For quicker steering, both vehicles have a new 1.5-turn steering rack, paired with standard Electronic Power Steering (EPS).  The RZR XP Turbo EPS and RZR XP 4 Turbo EPS’ industry-leading braking performance ensures precision stopping. The brakes feature large, triple-piston front calipers, dual-piston rear calipers, stainless-steel rotors and large 248-mm ventilated discs on all four corners, for powerful stopping performance.

The RZR XP Turbo EPS and RZR XP 4 Turbo EPS will be available in late 2016 in Titanium Matte Metallic and Cruiser Black. The two-seat model will retail for $24,999 U.S. and the four-seat for $27,499 U.S. Both models come with an extended two-year factory warranty when purchased before December 31, 2016.


For customers looking for high performance at value pricing, the 2016 RZR XP Turbo is now available for $19,999 U.S. and the 2016 RZR XP 4 Turbo EPS is $22,499 U.S.


More information about Polaris Off-Road Vehicles and Polaris Engineered Accessories can be found online atwww.Polaris.com


About Polaris


Polaris Industries Inc. (NYSE: PII) is a global powersports leader with annual 2015 sales of $4.7 billion. Polaris fuels the passion of riders, workers and outdoor enthusiasts with our RANGER®RZR® and POLARIS GENERAL™ side-by-side off-road vehicles; our SPORTSMAN® and POLARIS ACE® all-terrain off-road vehicles; VICTORY® and INDIAN MOTORCYCLE® midsize and heavyweight motorcycles; SLINGSHOT® moto-roadsters; and Polaris RMK®, INDY®, SWITCHBACK® and RUSH® snowmobiles. Polaris enhances the riding experience with parts, garments and accessories sold under multiple recognizable brands, and has a growing presence in adjacent markets globally with products including military and commercial off-road vehicles, quadricycles, and electricvehicles. www.polaris.com
http://feeds.feedburner.com/~r/UtvIndustryNews/~4/Dnixaa5IysU

View the full article

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CapnWalleye
      Just picked up a Hisun 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • By CapnWalleye
      Just picked up a Cub Cadet 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • By aefron88
      This post will explain how to hook up your PC to the ECU of a Hisun/Coleman/Etc UTV to be able to read error codes & engine parameters for troubleshooting purposes.
      This is applicable to all small engines using the Delphi MT-05 ECU. This should cover all fuel injected Hisun models, as well as various other Chinese FI engines, as the Delphi MT-05 ECU seems to be the favored ECU solution.
      Even though we get actual engine error codes to display on the dash, sometimes we have “pending codes” (not yet confirmed by the ECU) or other intermittent issues that are hard to diagnose, for example a poorly connected sensor that may give intermittent false readings, or a sensor that’s putting out bad date, but not bad enough for the ECU to realize.
      The setup requires 2 cables, which are available for around $25 combined, a PC with a USB port, and some charityware software called “HUD ECU Hacker”. This gives the same functionality as the $300 dealer code scanner for a fraction of the price.
      In searching I found info about HUD ECU Hacker, but I have yet to see info anywhere about how to hook it up to a Hisun, so I took the leap and bought some cables, and made it work. I will show a step by step of how to do so in post two.
      I will be breaking this down into 2 posts:
      Delphi ECU Info & Overview (This post) System setup & use Delphi ECU Info (Skip ahead to the next post if your eyes glaze over technical details)
      The Delphi MT-05 ECU was developed to allow small engines to use fuel injection. A fuel injection system requires feedback from various sensors to operate efficiently. This feedback allows the adjustment of ignition timing, fuel injection volume, etc to efficiently and cleanly produce the most power possible from a given engine.
      The MT-05 ECU has a number of sensors that are required for proper functioning including; Coolant temp, crankshaft position, intake temp, intake pressure, exhaust O2, throttle position, as well as some other optional sensors that are used on more complex vehicles.
      From the sensors the ECU adjusts: Fuel injector timing/pulse, Idle air control valve, and ignition coil

      The Delphi MT-05 puts out diagnostic data, however it is not ODB2 like a modern car, where is where it gets tricky reading it. There are three options, there is an old 16 bit piece of software Delphi has that is not able to run on a modern computer, there is the motorscanner tool for dealers ($300), or there is freeware HUD ECU Hacker with the proper cables.
    • By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • By SSgt1994
      Hello everyone, second time posted looking for assistance. First time you all were a great help!
      I have an 2013 XY Powersports 600GKE UTV, sweet little machine when she was running. My youngest last fall get it covered in mud, and then blew the engine. I mean she doesn't start any more, and we've even tried rebuilding it since he's in a Vocational School for Power Sports and Diesel course, but no luck.
      One of the other members (NVM"something") was really knowledgeable about the machine I had and the engine, all I can tell you is its a CFMoto. If I can't find a replacement, does anyone know if there is one that it can be easily swapped out with, or even minor modifications.
       
      Thanks!
      Myron
×
×
  • Create New...