Quantcast
Jump to content


Recommended Posts

Posted

Is it as inaccurate as the one I got with my Outfitter 400--which among other things placed the spark plug under the seat (it's not, it's under the cargo bed); and the air filter under the bed (It's not, it's under the seat). Apparently on earlier 400s the cylinder slanted forward, on my 2020 it slants rearward--don't know when that was changed but the OM has yet to catch up with it.

EngineSlantsBack.thumb.jpg.cd997271190815093061f5cec3343a6a.jpg

 

The manual supplied with the vehicle also referenced using the  choke  when starting the engine; it even had an illustration of the nonexistent "choke"--my 2020 is EFI, no choke--it made no mention of the steering column mounted ignition switch/steering lock or horn, light switch/turn signals. The "jump starting" instructions began with "Opening the hood" to access the battery--the battery is under the seat...

I complained to Coleman and they sent me an "updated"manual which corrected the  switch issues but continues to misplace the spark plug ans air filter; and still says "open he hood" to access the battery. Tire pressures provided in the manual(10/10 F/R) are in conflict with the "warning" sticker on the vehicle (12/14 F/R).

The maintenance schedule charts have miles and km change interval labels reversed--I sent them a 30-point correction list 6 weeks ago, have received no response.

Other than that...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
    • By dman66
      My buddy has a ut400 that the forward gear keeps popping out of gear. She only has like 400 miles on the odometer .the shift cable has been adjusted and the shift lever has been updated / modified. All other gears are good. Is there an internal detent cam or something that wears out or shift fork that can be replaced ? Or is there some other magic that I can perform ? Looks like the engine needs to be split.
    • By amiracle40995
      I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have. 

×
×
  • Create New...