Quantcast
Jump to content


Hello from Calgary

Rob DeVido

By Rob DeVido
in New Members Area

 Share

Recommended Posts

Rob DeVido Apprentice

Rob DeVido

Posted
Posted

Hi all! glad to be here! I'm new to the world of UTV's ,side by side's  what ever the right term to use is.LOL  I have a Coleman 400UTV-5 and the family and I love it so far. I have lots to learn about it regarding maintenance and use, so get use to possibly getting a lot of questions. I'll try my best to limit them and some may be even silly/stupid questions and I'll apoligize now in advance and ask for your patience and a little tolerance.   I have posted a question regarding gear oil , thats has been frustrating to find, so I appreciate any help there.  So for now thanks  for letting me in, and I look forward to being here.

1st pick out at the property being enjoyed, 2nd pic was the day we picked her up ( it was exciting for us)

 

ED92E82A-C4FB-4DD5-A752-5498C18C1542_1_105_c.thumb.jpeg.b1a908a86544aaf6d1b11709469a04f6.jpegB9A8F369-6804-48AD-9056-535F380A201F_1_105_c.thumb.jpeg.ed9fe1fec3ef0dfbadb6803a1b994fbc.jpeg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Homeowner A
      Code Reader for Delphi MT05 Coleman UTV 400 Hisun
      By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Alien10
      Snow Blade for Coleman Outfitter 550?
      By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.
    • Homeowner A
      Hisun Coleman UTV repair shop DFW TX?
      By Homeowner A
      Could someone please recommend a reputable shop to troubleshoot and repair a Coleman UT 400 in the DFW TX area?  
    • Tejun
      Coleman 550 Rear Differential Leak
      By Tejun
      Neighbor rode their Coleman with the park brake apparently not fully released. Needless to say, things got pretty hot and even started smoking and the smoke was definitely gear oil smell. Looks like oil is coming from the area just behind the disc for the park break. Looking at parts diagram, there is an oring behind the nut/washer that attaches the flange to pinion shaft. I'm not finding anything on YT that would help with disassembly. Anyone have some experience with removing rear driveshaft ?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...