Quantcast
Jump to content


Recommended Posts

Posted

the Original MULE windshield is 20 years old, and has seen better days. It's filled with tiny scratches. and it's foggy while day driving and hard to see at night with the lights on. Well, Novus 2 fixed that!

https://www.amazon.com/NOVUS-Plastic-Fine-Scratch-Remover/dp/B002UD0GGS/ref=sr_1_4?dchild=1&keywords=novus+28oz&qid=1615663960&s=automotive&sr=1-4

my windshield looks almost 99% new, i was astonished at the difference. i tried it on a small area first to be sure of no adverse affects, and then did the entire both sides of the windshield and it looks great! I highly recommend it, and it's way cheaper than plexi or Lexan sheet.

post some pics later.

Posted

+++100 or so on this--I have never used it, but a very good friend who bought a retired CHP 900 Kawasaki did--with EXCELLENT results--look's like new.--10 years with the CHP is NOT light duty...

  • Like 1
Posted

Another question for the UTV Board populace, anyone know if a plexi glass hardcoat is available for purchase? 

I know They sell windshields with a hard coat to prevent future scratches but is it cost effective or even possible for a average Joe to do this?

Posted
25 minutes ago, cliffyk said:

AFAIK the "hard coat" is part of a manufacturing process, not some "after-the-fact' application--could be wrong about this though...

that's probably the case as i'm not finding anything.

  • 2 weeks later...
Posted

After i did novus 2, a few days ago i went back over it with Novus 1 which is a spray, and not a paste. it's more of a polish/cleaner, (like windex for plastic/lexan) and i tell you what that stuff works great! looking out that windshield has never been clearer!

https://www.amazon.com/NOVUS-PC-10-Plastic-Clean-Shine/dp/B002UD0GFE/ref=sxts_sxwds-bia-wc-rsf1_0?cv_ct_cx=Novus+1&dchild=1&keywords=Novus+1&pd_rd_i=B002UD0GFE&pd_rd_r=eb75d0d2-cd95-438a-96bc-0461a59da050&pd_rd_w=XY71r&pd_rd_wg=DVSpE&pf_rd_p=5168df84-062d-4bdf-8a6e-2680813bd42f&pf_rd_r=B4R7DM65659VH7ZY6R30&psc=1&qid=1616779290&sr=1-1-7bf78e84-8ef2-4f13-9926-bee5153e81cb

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By Alien10
      I added lights to the Coleman Outfitter 550 last fall.   I bought lights on line from Nilight, a 300 W  12" light bar mounted forward and 2 square 4" floods for the rear.  Those are mounted on the roof corners facing rear and downward just beyond the tailgate.  Nilights seem to be of high quality, as I've had them on my garden tractor for 5 years and still flood the way ahead with great light. 
      Both the front and rear lights provide amazing illumination making the OEM headlamps look like parking lights.  Made a connector for the front bar that plugs into existing headlamp switch so it is just part of that circuit controlled by the headlamp switch.   Rear work lamps were wired in using a rocker switch installed in the dash.  Backed up to the garden with the work lights and was able to harvest some tomatoes well past sunset. 
      What have you used if anything for auxiliary lighting on your UTV?
       
       
    • By jimvmcgee
      I have a 2023 560 T Boss that I just noticed that back up lights not working, the camera come's on. The book tells you about tail light replacement, so was wondering if the lens is just there.
×
×
  • Create New...