Quantcast
Jump to content


Recommended Posts

Posted

I am thinking about buying a 2014 Polaris Ranger 900 XP EPS for $9,000. It has 5,288 miles with 628 hours. Are the miles and hours too high? The unit appears to be in great shape and well taken care off? Any suggestions would be helpful. Thanks in advance!

Posted

I looked up the original  MSRP and it was $14,199,  at 628 hours, if it has been well taken care of and fluids changed when they're supposed to, i'd say it should have plenty of life left. You can probably get another 1,000 hours out of the engine, at least. And it's not like Polaris is going  out anytime soon so parts should be readily available when it does break down.

Posted

5288 miles in 628 hours is just 8.4 mph average--so it appears it wasn't beat up too hard. I'm right around 14.5 mph average in 37 hours on my Coleman  Outfitter 400--there's a lot of flat open land here--I can hit 40 on the power lines down the road from my house.

  • 1 month later...
Posted

Kelly Blue Book lists it as $9600 from a dealer, stock, no upgrades.  With that mileage, you have to expect to replace the normal wear and tear parts, bushings, etc as you might have to do with any used machine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
×
×
  • Create New...