Quantcast
Jump to content


Recommended Posts

Posted

I still have the stock seat belts with the anti sub and the shoulder straps bagged and in the under driver seat storage compartment. When we go for a ride, we are constantly tightening the straps back up. Is this problem for others also. Strongly considering getting some from an auto salvage yard.

Jeff

Posted
I still have the stock seat belts with the anti sub and the shoulder straps bagged and in the under driver seat storage compartment. When we go for a ride, we are constantly tightening the straps back up. Is this problem for others also. Strongly considering getting some from an auto salvage yard.

Jeff

And I thought it was just me......

Cinda

Posted

I also have replaced mine with Crow Camlock. Got a brand new set off Ebay for $175, about half cost. Love um. Super nice to use, you can easily get them real tight on you and they don't loosen.

The pics show how I mounted my belts both behind the seats and on the sides. The extra tab on the side keeps the belt clip out from under the seat itself when closing the seat.

2569229460104282158bcBkAz_th.jpg

2387091040104282158IqrWnV_th.jpg

Lenny

  • 1 month later...
  • 1 month later...
Posted
Here's how I fixed my seat belt attachment point problem.2933637990104110397iGmWMW_th.jpg

Here's how I fixed my seat belt and the attach point, I replaced the belt and modified the shoulder straps, no submarine strap. Cost $32.00 + shipping.

2098368700104110397fBoHyO_th.jpg 2108763720104110397YIKulg_th.jpg 2517885380104110397TgDeFC_th.jpg

Posted
Kinarfi, Why no submarine strap?

rocmoc n AZ/Mexico

I don't get radical enough and at 6'4", there's not enough room for me to slide down any way, so I figured I didn't need it, but if I do decide to put it in, I can just loop it down through the hole with the stock adjustment buckle.

Posted
Funny how different people are. I use it even on the street but not the shoulder belts.

rocmoc n AZ/Mexico

Your so right! we are all a little strange/different, ain't it fun :D , actually, I haven't used the shoulder straps at all yet and carry them in the buggy so I don't lose them and in case I think I need them, I just put them in the photo to show how I modified them to work with my new seat belts, which I replaced because the stockers wouldn't stay tight.

kinarfi

Posted
well they held my big dumb butt in while hanging on my side

I don't know you yet, but I don't think I would have put it that way. The fact that they were on and it wasn't your fault, if I remember, does away with the Dumb part. Any way, have you had any trouble with them loosening up as you drive, It was a constant problem for my wife and I, and since we only used the lap belts and they were always getting loose, I replaced them.

Kinarfi

Posted
I don't know you yet, but I don't think I would have put it that way. The fact that they were on and it wasn't your fault, if I remember, does away with the Dumb part. Any way, have you had any trouble with them loosening up as you drive, It was a constant problem for my wife and I, and since we only used the lap belts and they were always getting loose, I replaced them.

Kinarfi

Yes they lossen up all the time.

I actually asked some friends on a race car forum that I go on if they had any out of date belts and a friend said he would send me them for free. I figured that I could just pick them up cheap but I think free is really good.

Posted
"I think free is really good." It's excellent!!!! I was thinking, if he sends 4 sets,.....oh never mind, I got new ones in and don't wanna do it again. :P:D

well the point is that in race cars the Sfi crt is only good for 2 years so you may ask around maybe free or cheap

  • 3 years later...
Posted

I used mine for limit straps. IMHO replace with a good set of cam locks. If you can find a local SCCA or NASA racer, they have to replace belts too early per racing rules by both organizations. You can get them really reasonable and they are still great for use in the Trooper.

rocmoc n AZ/Mexico

Posted

I have 2 sets I can use off a dirt tracker like new but I just don't have the quick disconnects on the attachment points and hate to make them solid mounted...Cant seem to find the quick ones.

Posted

Yeah I guess those would work pretty good...Never gave them a thought DAH! I was thinking the quick snap ones like rock climbing and thought no not strong enough.....Thanks I sometimes have my head up my butt LOL..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Texjpr
      2002 ranger 500 4x4 stopped running and wouldn't restart. Service manual wiring diagram helped identify the hub safety switch as the culprit. Using jumper wires to bypass  switch allowed the engine to start and run normally. Inspection of switch showed melted epoxy and a strong smell of burnt electrical. Unable to find replacement part either used or new. Is there a work around other than jumper wiring?
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
    • By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks
    • By jimvmcgee
      I have a 2023 560 T Boss that I just noticed that back up lights not working, the camera come's on. The book tells you about tail light replacement, so was wondering if the lens is just there.
    • By mac66
      Apparently, these are Hisun or at least they use Hisun engines. I can't find much info on them online yet.  Ran across a used one with just 100 miles on it as a very reasonable price.  Just curious.
      Okay, more info...they are owned by Textron Corp who also owns Bell Helicopter, Cessna & Beechcraft aircraft, Ez-Go & Cushman and Arctic Cat and a bunch of other companies.
      So are thy cheap Chinese crap machines or are they good to go?
×
×
  • Create New...